Hama 00178881, 00178911 Operating Instructions Manual
NL
D
GB
Operating Instructions
Bedienungsanleitung
Gebruiksaanwijzing
“Disc”
Full Wireless Headset
00178881
00178911
2 1
3
3
4
5
8
6
7
2
G Operating instruction
Controls and Displays
1. Multifunction button
2. Earpad
3. Status LED of BT earphone
4. Charging box
5. On/Off button of charging box
6. Charging socket of charging box
7. Status LED of charging box
8. Battery display of charging box
Thank you for choosing aHama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in asafe place for
futurereference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
2. Package Contents
• Hama ‘Disc’ Bluetooth®headset, 1pair
• 1xUSB charging cable
• 1xcharging box
• Earpads, three pairs (various sizes)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moistureand overheating, and only
use it in adry environment.
• Do not allow yourself to be distracted by the product, for example
when driving avehicle or operating sports equipment. Always pay
attention to the surrounding trac and your environment.
3
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the
specications.
• Do not open the device or continue to operate it if it becomes
damaged.
• Since the battery is integrated and cannot be removed, you will
need to dispose of the product as awhole. Do this in compliance
with the legal requirements.
• Dispose of packaging material immediately according to locally
applicable regulation.
• Do not modify the product in any way.Doing so voids the warranty.
Warning –Rechargeable battery
• Only use suitable charging devices or USB connections for
charging.
• As arule, do not charge devices or USB connections that are
defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to completely
discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• We suggest to fully charge the item for at least one time in two
months
Warning –Loud volume
• Using this product limits your perception of ambient
noise. Forthis reason, do not operate any vehicles or
machines while using this product.
• Always keep the volume at areasonable level. Loud
volumes, even over short periods, can cause hearing
loss.
Warning –Magnets
• This product generates magnetic elds. Persons with a
pacemaker should consult adoctor beforeusing the product, as
the pacemakers proper function could be affected.
• Do not keep any bank cards or similar cards with magnetic strips
near to the charging box or earphones. The data on the cards
could be damaged or deleted.
4
4. Getting Started
• Both earphones and the charging box areequipped with a
rechargeable battery.The battery must be fully charged before
using the device for the rst time.
• Youcan charge the earphones directly using the charging box
(docking station function), or charge the battery of the charging
box. This allows you to charge the earphone batteries while on the
go, without an external power supply (power pack function).
Note
Use only the supplied USB charging cable!
4.1 Charging the earphones
• Ensurethat the earphones areswitched off beforecharging them.
• Place both earphones in the charging box.
• Start charging the earphones by pressing the on/off button (5) of
the charging box.
• The status LEDs of the charging box (7) and earphones (3) arelit
redwhile the earphones arecharging.
• If charging does not start, the charge level of the charging box is
too low.Charge the charging box as described in Section 4.2.
• It takes about one hour to charge an earphone battery.
• When the batteries of both earphones arefully charged, their
status LED (3) goes out and the status LED of the charging box
(7) is constantly lit blue.
4.2 Charging the charging box
• Begin charging by connecting the included USB charging cable to
the charging socket (6) and to the USB connection of asuitable
USB charger.
• Please refer to the operating instructions for the USB charger used.
• The status LED of the charging box (7) is constantly lit redduring
charging.
• It can take up to two hours to fully charge the battery.
• When the battery is fully charged, the status LED (7) of the
charging box is lit blue.
• Disconnect allcable and mains connections after use.
5
Note
• If the batteries of the earphones and the charging box areempty,
the earphone batteries will be recharged rst. After that, the
battery of the charging box will be charged (the status LEDs (3)
of the earphones go out; the status LED (7) of the charging box
continues to be lit red).
• Acharging box battery that has been fully charged allows you to
completely charge both earphones about three times.
5. Operation
5.1 Switching the earphones off/on
• Turn On:
With the device off,press and hold the multifunction button (1)
for three seconds until you hear avoice say ‘Power on’. The status
LED (3) ashes blue.
• Turn Off:
With the device on, press and hold the multifunction button (1)
for four seconds until you hear avoice say ‘Power off’. The status
LED (3) willlight up in redbeforethe device turns off.
The rst time the device is turned on, pairing is automatically started
–see 5.2 Bluetooth
®
pairing –Headset.
5.2 Bluetooth®pairing –Headset
• First the two earphones must connect to one another.
• Ensurethat both earphones areswitched off.
• Press and hold the multifunction button (1) of both earphones
for approximately ve seconds until the status LEDs (3) begin to
alternate between ared and blue light.
• The earphones pair with one another within about ten seconds and
can then be connected to aterminal device.
• If the two earphones cannot set up aconnection within two
minutes, they will automatically switch off.
• If pairing was successful, you will hear avoice say ‘Connected’.
6
Note
• When the device is turned on, the earphones automatically
connect to one another.
• The left earphone is always the master.The right earphone is
guided by the information of the master.
• Therefore, when connecting the headset to terminal devices in
futur
e, you mer
ely have to put the master into pairing mode. The
other earphone is automatically connected.
5.3 Bluetooth
®
pairing with terminal device
• The earphones and the terminal device should be no further than
one metreapart. The shorter the distance, the better.
• Ensurethat both earphones areswitched on and paired with one
another.
Note –Pairing
• Make surethat your Bluetooth®-capable terminal device is on
and Bluetooth®is activated.
• Formoreinformation, please refer to the operating instructions
of your terminal device.
• Open the Bluetooth
®
settings on your terminal device and wait until
Hama Disc appears in the list of Bluetooth®devices found.
• Select Hama Disc and wait until this headset is listed as connected
in the Bluetooth
®
settings on your terminal device.
Note –Bluetooth®password
Some terminal devices requireapasswordinorder to connect to
another Bluetooth®device.
• If your terminal device requests apasswordtoestablish the
connection, enter 0000.
Note –Displays/announcements
• If pairing was successful, the status LEDs (3) ash blue every ve
seconds.
• If pairing with the terminal device was successful, you will hear a
voice say ‘Pairing successful. Second device connected’.
7
• In addition, avoice announces ‘connected left channel’ for
the left earphone and ‘connected right channel’ for the right
earphone.
5.4 Automatic Bluetooth
®
connection
(after successful pairing)
Note
•
Make sur
ethat your Bluetooth®-capable terminal device is on
and Bluetooth®is activated.
• Formoreinformation, please refer to the operating instructions
of your terminal device.
• Ensurethat the earphones areswitched on.
• Youcan only switch on the master.The master will automatically
connect to the terminal device after successful pairing. If the other
earphone is likewise switched on, it connects to the master and so
is likewise automatically paired with the terminal device.
• After the devices have been paired, aconnection is established
automatically.
• Youcan now use the headset.
Note
• If pairing was successful, the status LEDs (3) ash blue every ve
seconds.
• It may be necessary to change the settings on your terminal device
to enable it to automatically connect to the paired headset.
Note –Connection impaired
After the devices have been paired, aconnection is established
automatically.Ifthe Bluetooth®connection is not established
automatically,check the following:
• Check the Bluetooth
®
settings of your terminal device to see
whether it is connected to the Hama Disc headset. If not, repeat
the steps listed in Section 5.3 Bluetooth
®
pairing with
terminal device.
• Check whether obstacles areimpairing the range. If so, move the
devices closer together.
• The performance can also be affected by aweak battery.
8
5.5 Audio playback
Note
• Note that support for certain key functions may vary depending
on your terminal device.
• Formoreinformation, please refer to the operating instructions
of your terminal device.
• Functions can still be controlled directly via the terminal device.
• Set the volume on your terminal device to alow level.
• Start audio playback on the connected terminal device or press the
multifunction button (1) on one of the earphones.
• Press the multifunction button (1) on one of the earphones once
moretostop audio playback.
5.6 Hands-free function
Note
• Note that support for certain key functions may vary depending
on your terminal device.
• Formoreinformation, please refer to the operating instructions
of your terminal device.
• Functions can still be controlled directly via the terminal device.
• When you make and receive telephone calls, only the left
earphone is used for the transfer of sound; the same applies to
control of the hands-free functions.
Making acall
• Dial the number directly on your terminal device to make acall.
Accepting calls
• Press the multifunction button (1) once to answer an incoming
call.
Rejecting an incoming call
• Briey press the multifunction button (1) twice in succession to
reject an incoming call.
Ending acall
• During acall, press the multifunction button (1) once to end the call.
Redial
• Briey press the multifunction button (1) twice to call the last
number.You will hear ashort beep.
9
Note –Call quality
To increase the call quality,make surethat you arenear your
mobile phone during the call.
5.7 Disconnecting the headset
• Switch off both earphones.
•
Disconnect the headset via the Bluetooth®settings on your terminal
device.
5.8 Battery capacity
• To save energy,the earphones automatically switch off if they are
not connected to adevice for longer than ten minutes.
• When the battery level is low,avoice says ‘Low battery,please
charge’ and the status LED (3) ashes red.
• Charge the earphones as described in Section 4. Getting started.
Note
However,the talk and standby times may vary when used with
different mobile phones or other compatible Bluetooth
®
devices,
usage settings, usage styles and environments.
Note –Battery display
• Each status LED of the battery display (8) corresponds to 25%
of the capacity.When an LED is illuminated, this indicates that
this capacity level has already been reached. If three LEDs are
illuminated, the charging box is at least 75% charged.
Note –Battery display
• If all four status LEDs light up, the fullcapacity is available.
• Press the on/off button of the charging box (5) to switch it on
and to display its current capacity level.
6. Care and Maintenance
Only clean this product with aslightly damp, lint-free cloth and do
not use aggressive cleaning agents. Make surethat water does not
get into the product.
10
7. Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failuretoobserve the operating
instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here: www.hama.com
9. Technical Data
Bluetooth®headset
Earphone/microphone
impedance
16Ω/300 Ω
Earphone/microphone
frequency
20 –10.000 Hz /
100 –10.000 Hz
Earphone/microphone
sensitivity
97dB +/- 2dB/
-42dB +/-3dB
WBCV ≤ 75 mV
Range Max. 10m
Bluetooth
®
technology v4.2
Prole
A2DP /AVRCP /HFP /HSP /
SBC /MP3 /AAC
Transmission frequency 2.4 –2.48 GHz
Standby /talking /music time
80h/4h/
3h(at 60% volume)
Battery for each earphone
Battery type 3,7V/Li-Ion
Min. capacity 55mAh /0,20 Wh
Charging time ~1h
Loading...