Hama 00 080542 Operating Instructions Manual

00
080542
Induction Charger
Induktionsladegerät
D
GB
Operating Instructions
A
B
1
2
2
Controls and Displays
1. Micro-USB input
2. Status LED
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
Induction charger
Micro-USB cable
These operating instructions
3. Safety Notes
The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specications.
Do not open the device or continue to operate it if it becomes damaged.
Do not use the product in areas where the use of electronic devices is not permitted.
In order to prevent damage caused by overheating, make sure the product is not covered by
textiles, metal or other objects.
G Operating instruction
3
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product. The data on the cards could be damaged or deleted.
4. Getting Started and Operation
Note
For charging a terminal device with the induction charger, your terminal device has to be compatible with the induction charging technology. Please read the operating instructions of your device.
Please note that mobile phone sleeves, covers, etc. and other materials between the induction charger and the backside of your terminal device disturb or prevent actually the charging process.
Connect the included Micro-USB cable to the Micro-USB input (1) on the induction charger and to a suitable USB charger. Please refer to the operating instructions for the USB charger used.
When the power supply is active, the status LED (2) lights up.
Warning
Only use suitable charging devices or USB connections for charging.
As a rule, do not use charging devices or USB connections that are defective and do not try to
repair them yourself.
Insert your terminal device with the back on the induction charger (B).
Charging starts as soon as an effective induction eld has been generated. The status LED (2)
changes its colour. The current charging status appears on your terminal device.
If no connection can be established through induction, you may have to change the position of your terminal device (B).
Charging stops automatically once your device’s battery is fully charged.
Remove your terminal device from the induction charger and disconnect the station from the
power supply.
4
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-115 (German/English) Further support information can be found here: www.hama.com
8. Technical Data
Induction Charger
Input 5V 1.5A
Output 5V max. 1A
Dimensions 65 x 65 x 10 mm
9. Declaration of Conformity
Hama GmbH 8 Co. KG hereby declares that the device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. See www.hama.com for the declaration of conformity with the relevant directive..
5
Bedienungselemente und Anzeigen
1. Micro-USB-Eingang
2. Status-LED
Vielen Dank, dass Sie sich für ein Hama Produkt entschieden haben! Nehmen Sie sich Zeit und lesen Sie die folgenden Anweisungen und Hinweise zunächst ganz durch. Bewahren Sie diese Bedienungsanleitung anschließend an einem sicheren Ort auf, um bei Bedarf darin nachschlagen zu können. Sollten Sie das Gerät veräußern, geben Sie diese Bedienungsanleitung an den neuen Eigentümer weiter.
1. Erklärung von Warnsymbolen und Hinweisen
Warnung
Wird verwendet, um Sicherheitshinweise zu kennzeichnen oder um Aufmerksamkeit auf besondere Gefahren und Risiken zu lenken.
Hinweis
Wird verwendet, um zusätzlich Informationen oder wichtige Hinweise zu kennzeichnen.
2. Packungsinhalt
Induktionsladegerät
Micro-USB-Kabel
diese Bedienungsanleitung
3. Sicherheitshinweise
Das Produkt ist für den privaten, nicht-gewerblichen Haushaltsgebrauch vorgesehen.
Schützen Sie das Produkt vor Schmutz, Feuchtigkeit und Überhitzung und verwenden Sie es nur in
trockenen Umgebungen.
Lassen Sie das Produkt nicht fallen und setzen Sie es keinen heftigen Erschütterungen aus.
Betreiben Sie das Produkt nicht außerhalb seiner in den technischen Daten angegebenen
Leistungsgrenzen.
Öffnen Sie das Produkt nicht und betreiben Sie es bei Beschädigungen nicht weiter.
Benutzen Sie das Produkt nicht in Bereichen, in denen elektronische Produkte nicht erlaubt sind.
Achten Sie darauf, dass das Produkt nicht durch Textilien, Metall- oder sonstige Gegenstände
abgedeckt wird, um Schäden durch Überhitzung zu vermeiden.
D Bedienungsanleitung
Loading...
+ 11 hidden pages