Das neue PS2-Racing Wheel »Thunder V18« ist ein Lenkrad mit KeyMap-Funktion. Das Lenkrad ist für alle
Arten von Racing Game Software geeignet, z. B. Autorennen.
2. Te chnische Daten und Funktionen
1) 3 Modi: Normal (LED aus), Analog (Rote LED leuchtet), Negcon (Rote LED blinkt);
2) Unterstützt 2 Motoren zur Vibration;
3) 12 Ta sten und Fußpedal Links/Rechts
4) D-pad zur Steuerung mit 8 exakten Richtungen und 8 unabhängigen Ta sten
5) Drehbarer Lenkbereich 180 Grad;
6) Alle Hand- und Fußpedale sind gefedert und können sowohl zum Beschleunigen als auch zum
Bremsen verwendet werden, garantiert absolut realistisches Feeling;
7) Die Schaltwippen funktionieren als Schalthebel für die Gangschaltung (programmierbar)
8) Vier große und strapazierfähige Saugnäpfe sorgen für sichere Befestigung und einfache Handhabung
9) Jeweils 2 Meter Kabel für Lenkrad und Fußpedal
10) Betriebsstrom < 170 mA.
3. Anschluss & Installation
1) Lenkrad mit Fußpedal verbinden.
2) Lenkrad an die PS2 anschließen.
4. Positionen der Funktionstasten und Ta belle mit den entsprechenden Bezeichnungen
9L1L1L1
10L2L2Gang nach unten
11R2R2Gang nach oben
12L3L3L3
13R3R3R3
14L2L2Gang nach unten
15R2R2Gang nach oben
16D-PADD-PADD-PAD
17SELECTSELECTkeine Funktion
18MODEMODEMODE
19STARTSTARTSTART
5) Modusfunktion
A3 Modi stehen zur Auswahl: Normal (LED aus), Analog (rote LED leuchtet), Negcon (rote LED blinkt).
B Reihenfolge zum Einrichten des Modus: Normal (LED aus) -> Analog (rote LED leuchtet) ->
Negcon (rote LED blinkt) -> Normal (LED aus)
CBei einigen Spielen ist die PS2-Konsole in einem bestimmten Modus gesperrt. In diesem Fall zeigt die
MODE LED diesen bestimmten Modus an, und die Ta ste MODE kann nicht verwendet werden.
4
Page 6
L PS2-Racing Wheel »Thunder V18«
Instruction Manual:
1. Brief Introduction
PS2-Racing Wheel »Thunder V18« is the one of new multi-function racing wheel controllers which has the
KeyMap function. It is compatible with all kinds of racing game software.
2. Te chnology Specification and Feature
1) 3 modes: Digital Analog, Negcon
2) Supports 2 motors for vibration
3) 12 buttons and Left/Right foot pedal
4) D-pad of 8 exact directionsl control and 8 independent buttons
5) Veer range of 180 steering degree
6) Both hand paddles and foot pedals with springs can accelerate and decelerate, which make you get
the realistic feeling
7) Switch whip have the function of shifted gear (can be programmed)
8) Four big durable suction cups make it fixed and easy to operate
9) Both cable for steering wheel and foot pedal are 2.0m
10) Working current < 170mA.
3. Connection & Installation
1) Connect the steering wheel with foot pedal.
2) Connect the steering wheel to PS2. When you choose single player, make sure to connect the wheel
to the first left jack.
4. Function buttons layout with the corresponding name table
9L1L1L1
10L2L2Gear DN (DOWN)
11R2R2Gear UP (UP)
12L3L3L3
13R3R3R3
14L2L2Gear DN (DOWN)
15R2R2Gear UP (UP)
16D-PADD-PADD-PAD
17SELECTSELECTNo Function
18MODEMODEMODE
19STARTSTARTSTART
5. Mode Function
A 3 Modes for your choice: Normal (LED off), Analog Green LED on), Negcon (red LED flashes).
B Circulation way of mode setup: Normal (LED off) -> Analog (red LED on) -> Negcon (red LED
flashes) -> Normal(LED off)
C In some games, PS2 Console is locked as a certain mode, the MODE button is invalid, the MODE LED
shows that certain mode.
7
Page 9
f PS2-Racing Wheel »Thunder V18«
Manuel d’utilisation:
1. Introduction
PS2-Racing Wheel »Thunder V18« est un des rares volants de course multi-fonctions disposant de la
fonction KeyMap. Il est compatible avec toutes sortes de logiciels de jeux de course.
2. Spécifications techniques et caractéristiques
1) 3 modes : Digital, Analog, Negcon
2) Il supporte 2 moteurs de vibrations ;
3) Il dispose de 12 boutons de deux pédales gauche/droite
4) D-pad pour un contrôle directionnel exact et 8 boutons indépendants
5) Rayon de virage de 180 degrés
6) Les pavés manuels et les pédales sont équipés de ressorts permettant l’accélération et la
décélération vous garantissant ainsi des sensations très réalistes
7) Les pédales droite/gauche fonctionnent comme levier de vitesse et peuvent être programmées
8) La fixation est assurée par quatre grandes ventouses garantissant la facilité du maniement
9) Les deux câbles du volant et des pédales mesurent 2.0 m
10) Courant d’alimentation < 170 mA.
3. Connexion et installation
1) Connectez le volant aux pédales.
2) Connectez le volant à PS2 de jeu. Pour le mode joueur unique, le volant doit être
connecté à la première prise à gauche
4. Aperçu des boutons de fonction et tableau des descriptions correspondantes