Hama 00014156 Operating Instructions Manual

014156

FM Transmitter with Bluetooth®Function

FM-Transmitter mit Bluetooth

®

-Funktion

00

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

GB

D

F

1

3

2

4

5 7

6

6

8

G Operating instruction

Controls and Displays

1. USB charging connection, 2.4 A

2. USB charging connection, 1 A / USB stick

3. Display / Frequency indicator

4. Jump backward one title, Volume -

5. Start/Pause playback

6. Side: microSD card slot

7. Transmission frequency selection

8. Jump forward one title / Volume +

Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.

1. Package Contents

•FM-Transmitter mit

•These operating instructions

Bluetooth

®

- und Ladefunktion

2. Safety Notes

•The product is intended for private, non­commercial use only.

• Use the product for its intended purpose only.

•Do not operate the product outside the power
limits given in the specications.

•Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.

•Do not use the product in moist environments and
avoid splashes.

•Do not bend or crush the cable.

•Always pull directly on the plug when
disconnecting the cable, never on the cable itself.

•Do not drop the product and do not expose it to
any major shocks.

•Dispose of packaging material immediately
according to locally applicable regulations.

•Do not modify the product in any way. Doing so
voids the warranty.

Note

•When using this product, observe the
applicable local trac laws and regulations.

•Take care that components such as airbags,
safety areas, controls, instruments, etc. and
visibility are not blocked or restricted.

Warning

•Do not continue to operate the device if it

becomes visibly damaged.

3. Product Features

The FM transmitter is used to transmit music or
voice from a mobile device (smartphone, tablet, etc.)
to an FM playback device (such as a car radio) in
high quality in a car, caravan or boat. At the same
time, up to two terminal devices can be charged
simultaneously using the USB connections. The FM
transmitter is compatible with all terminal devices
that have a
can also transmit music or voice directly from a
USB stick (maximum of 32 GB) or a microSD card
(maximum of 32 GB).

®

Bluetooth

function. The FM transmitter

4. Getting Started and Operation

•Plug the FM transmitter into a power socket of
your vehicle’s electrical system, and then establish
the
device and the FM transmitter as described below.

•Alternatively, audio les can be transferred directly
from a USB stick or microSD card.

®

Bluetooth

connection between the mobile

Note

•For some vehicle types, the ignition has to be
switched on to supply power to the 12 V car
socket. For more information, please refer to
your vehicle’s operating instructions.

•Disconnect all cable and on-board connections
after use.

2

Bluetooth

®

pairing

4.1

Note

•Check whether your mobile device (MP3 player,
mobile phone, etc.) is

• If not, the only way you can use the FM
transmitter for playback is with a USB stick or
microSD card.

•Note that the maximum range for
is 10 metres without obstacles such as walls,
people, etc.

•Make sure that your
device is on and

•Plug the FM transmitter into a car socket located
near the car radio.

•Make sure that the FM transmitter is within the
maximum

•Open the
device and wait until BT10 appears in the list of

Bluetooth

•Select BT10 and wait until the FM transmitter is
listed as connected in the
your terminal device. A transmission frequency is
now shown on the display.

Note –

Some terminal devices require a password in
order to connect to another

•If your terminal device requests a password for
connection to the speaker, enter 0000.

Bluetooth

Bluetooth

Bluetooth

®

devices found.

Bluetooth

Bluetooth

®

®

settings on your terminal

®

Bluetooth

capable.

Bluetooth

®

capable terminal

®

is activated.

range of 10 metres.

®

settings on

Bluetooth

®

password

®

Bluetooth

device.

Note – Connection impaired

After the FM transmitter and terminal device
have been paired, a connection is established
automatically. If the
established automatically, check the following:

•Check the

®

•Check whether your terminal device and the

•Check whether obstacles are impairing the

Bluetooth

device to see whether BT10 is connected. If
not, repeat the steps listed under
pairing.

FM transmitter are less than 10 metres apart. If
not, move the devices closer together.

range. If so, move the devices closer together.

4.2 Audio playback (via

Start and control audio playback on the connected
terminal device accordingly. Alternatively, audio
playback can also be controlled on the FM
transmitter (if the connected device supports this
function).

•Press the
audio playback.

•Press the
one title.

•Press the
one title.

4.3 Audio playback

•Plug the USB stick into the USB socket marked
with

•Insert a microSD card into the card slot (6) on the
FM transmitter; playback will start automatically.

function button to start or pause

function button to jump forward

function button to jump backward

(via USB stick or microSD card)

(2); playback will start automatically.

®

Bluetooth

®

settings of your terminal

Bluetooth

connection is not

Bluetooth

®

)

®

Note

•The capacity of the USB stick or microSD
card must not exceed 32 GB.

•The following formats are supported for
audio playback: MP3.

3

4.4 Manual station search

•Search for an available frequency on your car radio
(static without partial signals).

•Set the same frequency on the FM transmitter. To
do this, press and hold the CH button (7) until
the frequency indicator on the display (3) begins
to ash.

•Then press the
frequency.

•The FM transmitter always stores the last frequency
set.

or button to set the desired

Note – Automatic standby

•After 50 to 60 seconds without a music signal
or button being pressed, the FM transmitter
switches to standby.

•If it receives a music signal or a button is
pressed, the FM transmitter is activated again.

4.5 Charging function

The FM transmitter has two USB connections. These
supply the charging currents specied in Point 8.
Technical specications.

Note – Connecting terminal devices

•Before connecting a terminal device, check

whether the power output of the charger can
supply sucient power for the device.

•Ensure that the total power consumption of all

connected terminal devices does not exceed
3400 mA.

•Please refer to the instructions in the operating

manual of your terminal device.

•Disconnect all cable and mains connections

after use.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.

7. Service and Support

Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: [phone] (German/English)
Further support information can be found here:
www.hama.com

8. Technical Data

Bluetooth

®

technology

FM transmitter
with
function

Bluetooth

Bluetooth

®

v2.1.

®

Input voltage 12 – 16 V

Input current

Output voltage, USB

1.7 A

5.0 V

Output current, USB 1 2.4 A

Output current, USB
2 (marked with
symbol)

1 A

VHF frequency range 87.6–107.9 MHz

Transmitting power Max. 50 nW

4