Hama 00014102, 00014103 User Manual

Muster

00014102
00014103

Bluetooth-Audio-Dongle Set “RXTX2”

Introduction

The Bluetooth-Audio-dongle-Set “RXTX2” with transmitter and receiver (Tx+Rx) offers the latest innovation in
Bluetooth technology. The Tx unit transfers stereo audio from music or audio players such as MP3 players or
Apple iPod to the Rx Bluetooth stereo headset/receiver wirelessly and freely. Rx is also capable of simultane­ous connection to a Bluetooth enabled mobile phone. You need never miss a call while enjoying your music
wirelessly.
As a plug and play product, Tx and Rx will search, pair, and connect themselves automatically.
The Tx unit plugs into your MP3 player, iPod or other playback device and, using Bluetooth technology, wire­lessly sends music to the Rx unit or to your Bluetooth Stereo headset. The lightweight Rx unit allows you to
plug in a stereo headset or portable speakers. In the case of headset usage you can wear the Rx unit on your
lapel or in a shirt or jacket pocket. Provided you and the Rx are within range of the Tx unit you will be able to
listen to music from your music player – wirelessly.

Getting started

Remove all components from the package. Items in the pack include: Tx transmitter
phones, USB Charging cable and this User Guide. Please check the contents carefully and contact your local
dealer immediately if anything is missing or damaged.

, Rx receiver

, Stereo Ear

-

Getting to know your Tx and Rx

TX Unit

Blue indicator LED
under tinted cover

5-pin mini USB-B
charging socket

TX Unit

Microphone

3.5mm
jack socket

2

ON/OFF
switch

5-pin mini USB-B
charging socket

iPod
Holder

3.5mm
jack plug

blue LED

ON/OFF Button
Ta lk Button
Pairing Button

Charging The Tx and Rx

Before using the Tx and Rx, you must charge them for approximately 2 hours. Fully charged, they provide up to
5 hours of playing time.

To Charge the units

1. Insert the mini USB-B plug of the charging cable into the mini USB-B socket on the Rx or Tx.

2. Insert the USB-A plug on the other end of the USB charging cable into a powered USB-A socket on a PC or
laptop computer. During charging, the LED will be on constantly.

3. When charging is fi nished, the LED will turn off.

4. Unplug the USB charging cable.

Pairing your Tx and Rx

Pairing is the Bluetooth process of establishing the wireless link between the Tx and Rx units. Before you can
use Tx+Rx you must pair both devices. Normally you only have to do this once. After pairing is complete the
units will (provided they are within range) fi nd each other and reconnect automatically at switch on. Additio­nally, Rx can be paired with a mobile phone – see later. Before you commence pairing them ensure that both
units are fully charged.

1. Try to ensure that no other nearby Bluetooth devices are active or in pairing mode.

2. With the Tx turned off, turn on Tx by sliding the miniature ON/OFF switch to the ON position.
The Blue LED will fl ash quickly. Now the Tx is in pairing mode.

3. To turn on the Rx press and hold the Talk button for about 2 seconds until the LED begins to fl ash.
Rx is now turned on and in pairing mode; the LED will fl ash quickly.

4. Ensure the units are within 3 metres of each other.

5. The two units should fi nd each other and pair.
This is indicated by the LEDs which will begin to fl ash slowly (approx once per second).

Switching your TX and Rx On / Off

The Tx+Rx combination is easy to use. Once they have been paired switching them on is all that you normally
have to do. All the other operations will be carried out automatically.
To turn on your Tx - Move the Power button to “On”, the blue LED will fl ash to indicate Tx is turned on.
To turn off your Tx - Move the power button to “Off”, the blue LED will stop fl ashing.

To turn on your Rx - Press and hold the Talk button for about 2 seconds, until the LED fl ashes. Release the Talk
button. Rx is now turned on and ready to use; the blue LED will fl ash to indicate Rx is turned on.
To turn off your Rx - Press and hold the Talk button for about 3 seconds. The blue LED will change from
fl ashing to being permanently on. Release the Talk button. Rx will turn off and the LED will stop fl ashing.

Playing Music

1. With the Tx turned on, plug it into the audio jack socket of your music player.

2. Ensure Rx switched on and is within 3 metres of Tx.

3. Plug your earphones or portable speakers into Rx.

4. The blue LEDs on both units will continue to fl ash once per second to indicate they are connected.

5. If the connection is lost try moving Rx closer to Tx and they will reconnect automatically.

6. If the audio becomes noisy or breaks up try moving Rx closer to Tx.

3