Halsey Taylor S-L-R User Manual
These water coolers are certified to
NSF/ANSI 61.
GENERAL
Self-contained, electric refrigerated,
free-standing water cooler designed to be
easily accessible to able-bodied individuals.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.
CABINET
Heavy-gauge vinyl clad steel. Resistant to
wear, moisture, perspiration, heat, and sunlight. Unit mounts flush against wall for a
cleaner, more attractive appearance. Optional
Stainless Steel is available.
COOLER TOP
Non-corrosive stainless steel cooler top, number
300 series with satin finish resists stains and
corrosion and is easy to maintain. Anti-splash
ridge reduces splatter. Contoured to insure
proper drainage.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
PLUMBING CONNECTIONS
Waste and supply lines secured to back of
cabinet. Waste 1
1
/
4" Supply
3
/
8" tubing.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling
temperature of storage tank water. Factory
set at 50° F Adjustable ± 5° F.
STORAGE TANK
Non-pressurized stainless steel
evaporator/storage tank for long life.
Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the
Safe Drinking Water Act.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.
VENTILATION
Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.
SUGGESTED SPECIFICATIONS
Shall deliver ( ) GPH of 50° F water at
90° F ambient and 80° F inlet water. Shall have
stainless steel basin with fixed drain strainer.
Bubbler shall be two stream, mound-building
type. Separate valve and automatic stream
regulator shall be mounted within cabinet.
Refrigeration system shall employ high efficiency,
positive start compressor using R134A,
non-pressurized tank with totally encapsulated
insulation and be controlled by positive sensing
thermostat. The manufacturer shall certify the
unit to meet the requirements of NSF/ANSI 61,
and the Safe Drinking Water Act. Unit complies
with ARI Standard 1010.
NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.
Standard Finish is Platinum Vinyl
Optional Finishes (extra cost)
■■
All Stainless Steel
Optional Accessories (extra cost)
■■
Glass Filler Kit
■■
Sump Pump Kit
■■
Vandal-Resistant Kit
■■
Water Filter
■■
Easy-Flex™Bubbler
Trap and service stop not included.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
C18 / 8-2007
MODEL:
■■
S300-2E-Q ■■S500-5E-Q ■■S1000-10E-Q
■■
S-L/R (Less Refrigeration)
SD - ECONOMY SERIES
Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt
Ambient Air Temp
Cap. lb. Usage
70°F 80°F 90°F
†
100°F
S300-2E-Q 3.6 3.3 3.0 2.7 3.0 2.5 54 230
S500-5E-Q 6.1 5.5 5.0 4.5 5.0 2.5 60 230
S1000-10E-Q 11.9 10.8 9.8 8.8 9.8 5.8 69 535
* With projector service and tap water at 80° F
†
UL listed and complies with ARI Standard 1010
Free-Standing Cooler
Economy
halseytaylor.com
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
S300-2E-Q, S500-5E-Q,
S1000-10E-Q, S-L/R
Economy Free-Standing
Cooler
(CONTINUED)
PLUMBING CONNECTIONS
Enter directly into cabinet. Waste 1
1
/4".
Supply
3
/8" tubing.
Trap and service stop not included.
OPERATING PRESSURES
Supply water-105 psi maximum
ELECTRICAL
Furnished with plug-in, 3-wire grounding type
service cord. Standard 120 volt, 60 Hz, single
phase. Transformers available for other power
supplies. (See capacity chart for amp rating.)
Install 120-volt receptacle, rated at 15-amp
minimum to receive 3-wire parallel blade
grounding type male plug.
Note: Installation outdoors in an unprotected
environment is not recommended.
SIDE VIEWFRONT VIEW
NOTE: A service supply stop must be installed at the cooler inlet line.
A = Recommended water supply location 3/8" O.D. unplated copper tube connect stub 1-1/2" (38mm) out from wall shut off by others
B = Recommended location for waste outlet 1-1/4" O.D. drain
C = 1-1/4" Trap not furnished
D = Electrical supply (3) wire recessed box
E = Insure proper ventilation by maintaining 4" (102mm) (Min.) Clearance from cabinet louvers to wall
Loading...