Halsey Taylor RWM L-R User Manual

These water coolers are certified to

NSF/ANSI 61.

GENERAL

Self-contained, electric refrigerated, semi­recessed wall-mounted water cooler designed
to be easily accessible to able-bodied individuals.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.

CABINET

Heavy-gauge vinyl clad steel. Resistant to
wear, moisture, perspiration, heat, and sunlight.
Optional Stainless Steel is available.

COOLER TOP

Non-corrosive stainless steel cooler top,
number 300 series with satin finish resists
stains and corrosion and is easy to maintain.
Anti-splash ridge reduces splatter. Contoured
to insure proper drainage.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

TEMPERATURE CONTROL

Positive sensing thermostat for controlling
temperature of storage tank water. Factory set
at 50° F Adjustable ±5° F.

STORAGE TANK

Non-pressurized stainless steel
evaporator/storage tank for long life.
Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the
Safe Drinking Water Act.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and water cooled
copper/aluminum condenser with maximum
heat exchange. System uses R134A refrigerant.
Protected by Halsey Taylor’s Limited 5 Year
Warranty.

VENTILATION

Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.

SUGGESTED SPECIFICATIONS

Shall deliver 7.8 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Shall have
stainless steel basin with removable drain
strainer. Bubbler shall be two-stream, mound
building type. Separate valve and automatic
stream regulator shall be mounted within
cabinet. Refrigeration system shall employ high
efficiency, positive start compressor using
R134A, non-pressurized tank with totally
encapsulated insulation and be controlled by
positive sensing thermostat. The manufacturer
shall certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act.
Unit complies with ARI Standard 1010.

NOTE: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard finish is Platinum Vinyl

Optional Finishes (no extra cost)

■■

Slate

■■

Almond

Optional Finishes (extra cost)

■■

Stainless Steel

Optional Accessories (extra cost)

■■

Water Filter

■■

Vandal-Resistant Kit

■■

Glass Filler (Factory installed, No. 2408
style glass filler only.)

■■

Easy-Flex™Bubbler

Trap and service stop not included.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

C11 / 1-2005

MODEL: ■■RWM8A-Q ■■RWM L/R (Less Refrigeration)

RWM SEMI-RECESSED SERIES

Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt

Ambient Air Temp

Cap. lb. Usage

70°F 80°F 90°F

†

100°F

RWM8A-Q 9.6 8.8 7.5 7.2 7.5 3.5 86 325

* With projector service and tap water at 80° F

†

UL listed and complies with ARI Standard 1010

Semi-Recessed Cooler

www.halseytaylor.com

Printed in the U.S.A.

Semi Recessed Cooler

(CONTINUED)

WALL OPENING

Cut a wall opening 151⁄2" W x 381⁄2" H.

MOUNTING INSTRUCTIONS
AND PLUMBING CONNECTIONS

Refer to rough-in for location of plumbing
through wall. Mount frame into wall opening.
Locate trap (not furnished) on waste line (see
roughing-in for proper distance from wall).

Trap and service stop not included.

OPERATING PRESSURES:

Supply water - 105 psi maximum

ELECTRICAL

Furnished with plug-in, 3-wire grounding type
service cord. Standard 120 volt, 60 Hz, single
phase. Install 120-volt receptacle, rated at
15 amp minimum, to receive 3-wire parallel
blade grounding type male plug.

NOTE: A service supply stop must be installed at the cooler inlet tube.

FRONT VIEW SIDE VIEW