Halsey Taylor OVL-II SEREE-Q User Manual

This water cooler is certified to

NSF/ANSI 61.

GENERAL

Modular, electric refrigerated, bi-level
wall-mounted water cooler designed to be
easily accessible to physically challenged and
able-bodied individuals. When properly installed,
unit meets state and federal requirements as
defined by the Americans with Disabilities Act.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.

FOUNTAIN

Oval shape fountain, non-corrosive stainless
steel, with brushed satin finish. Contour-formed
basin with rounded corners and edges. Oval
fountain shape requires less neck extension and
bending for the wheel chair user.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

AUTOMATIC ACTUATION

Model OVL-II

™

SEREE-Q features infra-red light
beam emitting sensor and a solenoid valve on
the extended right receptor. Upon interruption of
the light beam, the sensor actuates the
solenoid valve to flow water. User does not
have to touch the water cooler to obtain a
drink of water. Supplied with a built-in time
delay to avoid nuisance actuation from
passers-by. On the left side, the self-closing,
semi-circular push bar can be actuated at any
point on its 180° radius.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.

MOUNTING FRAME

Mounting frame is manufactured of corrosion
resistant, galvanized steel. Open construction
designed for ease of installation. Mounting
frame can be shipped in advance for rough-in
installation.

PANELS

Constructed of stainless steel, number 300
series with satin finish. Removable lower panel
provides access to plumbing and refrigeration
system. Panels overlap wall opening

1

/

2"

.

SUGGESTED SPECIFICATIONS

Shall deliver 7.5 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Fountain shall
include infra-red sensor, contour-formed basin
to eliminate splashing and standing water, and
rounded corners and edges. Bubbler shall be
chrome plated, two-stream, mound- building
type. Cooling unit shall have a high efficiency
positive start compressor using R134A, with
pressurized counterflow cooling evaporator/chiller.
Cooler shall comply with ANSI 117:1 and ADA
for visual and motion disabilities. The manufacturer
shall certify the unit to meet the requirements
of NSF/ANSI 61, and the Safe Drinking Water
Act. Unit complies with ARI Standard 1010.

NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.

NOTE: Water will only flow from bubbler
when unit has electrical connection.

Standard finish is Stainless Steel

Optional Finishes (extra cost)

■■

Aztec Gold

■■

Galaxy Gray Marblyte™(Bowl Only)

■■

Black Onyx Marblyte™(Bowl Only)

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

■■

Water Filter

■■

Easy-Flex™Bubbler

■■

Cane Apron

Each OVL-II™ SEREE-Q consists of 3 cartons
as follows:

Mounting Frame

Cooling Unit-SJ8-Q

Fountain, Panels & Misc. Parts

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

A23 / 8-2007

MODEL OVL-II™SEREE-Q

Barrier-Free Cooler

Bi-Level Electronic Eye

OVL-II

™

Series

halseytaylor.com

OVL-II™BARRIER-FREE SERIES

Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt

Ambient Air Temp

Cap. lb. Usage

70°F 80°F 90°F†100°F

OVL-II™ SEREE-Q 9.3 8.3 7.5 6.8 7.5 4.0 140 370

* With projector service and tap water at 80° F

†

UL listed and complies with ARI Standard 1010

Trap and service stop not included

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

OVL-II™SEREE-Q

OVL-II™Electronic Eye
Barrier-Free
Bi-Level Cooler

(CONTINUED)

WALL OPENING

IMPORTANT: It is necessary to create a wall
opening 37

1

/

2" W x 37

3

/4

" H and 4

1

/

2" above

the floor line.

MOUNTING INSTRUCTIONS

Refer to rough-in for location of plumbing and
electrical sources. The support frame is to be
installed first. The shelf for the water chiller
should be assembled to the wall frame, and
then place chiller into position. Hang upper
panel to hanger on frame. Fountains are to be
attached to panel and wall frame. Water service
lines, waste lines, and electrical are assembled
as required. The bottom panel is attached last,
after a final check for leaks and correct functions
of fountains and chiller. (For details see the
installation instructions.)

Installation requires trap to be installed in
wall. Trap and service stop not included.

OPERATING PRESSURES:

Supply water - 105 psi maximum

Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bilevel are in use simultaneously to ensure
adequate stream height. Use of water filter in
this situation is not recommended.

ELECTRICAL DATA

Junction box for a (3) wire 10 AMP branch
circuit. Standard 120 volt, 60 HZ, single phase.

FRONT VIEW

TOP & SIDE VIEWS