Halsey Taylor OVL-II SEBPFR User Manual

This fountain is Classified by

Underwriters Laboratories, Inc.
in accordance with ANSI/NSF 61,
Section 9 - 1997b.

GENERAL

Two oval shape fountains, one-piece,
non-corrosive stainless steel with brushed satin
finish. Contour-formed basins with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Oval fountain shape requires less neck
extension and bending for the wheel chair user.
Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubblers with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

PANEL

Constructed of stainless steel, number 300
series with satin finish.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns o r l a r g e r b e f o r e t h e y
enter the waterway.

WATER INLET

3/8˝ O.D. Tubing into freeze-resistant box.

DRAIN OUTLET

1-1/4˝ waste outlet located in freeze-resistant
valve system.

SUGGESTED SPECIFICATIONS

Both fountains shall include pushbuttons on the
front. Both shall include contour-formed basins to
eliminate splashing and standing water, and shall
have rounded corners and edges. Each projector
shall be two-stream, mound-building type with
integral hood guard and anti-squirt feature.
Fountain shall comply with ADA. The
manufacturer shall certify the unit to meet the
requirements of ANSI/NSF 61, Section 9 and the
Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.

Standard Finish is Stainless Steel
Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

Each OVL-II™SEBPFR consists of 2 cartons
of the following:

Fountain, Panel and Misc. Parts
Freeze-Resistant Valve System

Service stop not furnished.

Copper tube to water supply connection not
furnished

Shipping weight: 76 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B5 / 9-2002

MODEL: ■■OVL-II™SEBPFR

Barrier-Free Fountain

OVL-II™ Bi-Level

Freeze-Resistant

www.halseytaylor.com

Halsey Taylor Barrier-Free Drinking
Fountains and Water Coolers conform
to The Americans with Disabilities Act
and American National Standards
Institute Specifications.

Printed in the U.S.A.

Freeze-Resistant
OVL-II™Barrier-Free
Bi-Level Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of freeze­resistant system and plumbing. Mount wall
plate assembly to wall per the installation
instructions. Hang fountain panel over the wall
plate assembly. Attach fountains to wall plate
assembly. Water service line and waste line are
to be assembled as required. Final check for
leaks and correct functions of fountain should
be made. (For details see the installation
instructions.)

CAUTION –

Fountain must be securely

bolted to wall.

For wall support required locations see
installation instructions provided with
panel and fountains.

OPERATING PRESSURES:

Supply water - 105 psi maximum

SIDE VIEW

WALL LAYOUT

NOTE: A service supply stop must be installed at the fountain inlet line.
*ADA Requirement