Halsey Taylor OVL-II SBPFR User Manual

This fountain is Classified by

Underwriters Laboratories, Inc.
in accordance with ANSI/NSF 61,
Section 9 - 1997b.

GENERAL

Oval shape face-mounted fountain, one-piece,
non-corrosive stainless steel with brushed satin
finish. Contour-formed basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Oval fountain shape requires less neck
extension and bending.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

PANEL

Constructed of stainless steel, number 300
series with satin finish.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns o r l a r g e r b e f o r e t h e y
enter the waterway.

WATER INLET

3/8˝ O.D. Tubing into freeze-resistant box.

DRAIN OUTLET

1-1/4˝ waste outlet located in freeze-resistant
valve system.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front.
Shall include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
two-stream, mound-building type with integral
hood guard and anti-squirt feature. The
manufacturer shall certify the unit to meet the
requirements of ANSI/NSF 61, Section 9 and the
Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.

Standard finish is Stainless Steel

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

Each OVL-II™ SBPFR

consists of 2 cartons

of the following:

Fountain, Panel and Misc. Parts
Freeze-Resistant Valve System

Service stop not furnished.

Shipping weight: 48 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D8 / 9-2002

MODEL:■■OVL-II™SBPFR

Fountain With Back Panel

OVL-II

™

Face-Mounted

Freeze-Resistant

www.halseytaylor.com

Printed in the U.S.A.

Freeze-Resistant
OVL-II™Face-Mounted
Fountain With Back Panel

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of freeze­resistant system and plumbing. Mount wall plate
assembly to wall per the installation instructions.
Hang fountain panel over the wall plate
assembly. Attach fountain to wall plate
assembly. Water service line and waste line are
to be assembled as required. Final check for
leaks and correct functions of fountain should
be made. (For details see the installation
instructions.)

CAUTION — Fountain must be securely

bolted to wall.

OPERATING PRESSURES

Supply water-105 psi maximum
NOTE: For wall support required locations see

installation instructions provided with panel and
fountain.

WALL LAYOUT

SIDE VIEW

NOTE: A service supply stop should be

installed at the fountain inlet line.