Halsey Taylor OVL-II S User Manual

This fountain is Classified by

Underwriters Laboratories, Inc.
in accordance with ANSI/NSF 61,
Section 9 - 1997b.

GENERAL

Oval shape face-mounted fountain, one-piece,
non-corrosive stainless steel with brushed satin
finish. Contour-formed basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Oval fountain shape requires less neck
extension and bending.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self closing, semi-circular push bar can be
actuated at any point of it 180° radius.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns o r l a r g e r b e f o r e t h e y
enter the waterway.

WATER INLET

3/8˝ O.D. Tubing

DRAIN OUTLET

1-1/4˝ tube outlet for 1-1/4˝ slip joint connection.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbar on the front. Shall
include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
two-stream, mound-building type with integral
hood guard and anti-squirt feature. The
manufacturer shall certify the unit to meet the
requirements of ANSI/NSF 61, Section 9 and the
Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.

Standard finish is Stainless Steel

Optional Finishes (extra cost)

■■

Aztec Gold

■■

Galaxy Gray Marblyte™(Bowl Only)

■■

Black Onyx Marblyte™(Bowl Only)

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

■■

Easy-Flex™Bubbler

Each OVL-II™ S consists of 1 carton as follows:

Fountain, and Misc. Parts

Trap and service stop not furnished.

Shipping weight: 15 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D6 / 3-2003

MODEL:■■OVL-II™S

Face-Mounted Fountain

OVL-II

™

www.halseytaylor.com

Printed in the U.S.A.

OVL-II™Face-Mounted
Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of plumbing.
For wall support required locations see installation
instructions provided with fountain. Water service
line and waste line are to be assembled as
required. Final check for leaks and correct functions
of fountain should be made. (For details see the
installation instructions.)

CAUTION – Fountain must be securely

bolted to wall

OPERATING PRESSURES

Supply water-105 psi maximum
NOTE: A service supply stop should be installed

at the fountain inlet line.

FRONT VIEW SIDE VIEW