Halsey Taylor OVL-II ESBP User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Two oval shape fountains, one-piece,
non-corrosive stainless steel with brushed
satin finish. Contour-formed basins with
rounded corners and edges reduces splatter,
insures proper drainage and prevents standing
waste water. Oval fountain shape requires less
neck extension and bending for the wheel
chair user. Designed to be easily accessible to
both physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act. Barrier walls required or apron
installed to meet 27" cane touch prerequisite.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubblers with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self-closing, semi-circular push bar can be
actuated at any point of its 180° radius.

PANEL

Constructed of stainless steel, number 300
series with satin finish.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

WATER INLET

3/8" O.D. Tubing

DRAIN OUTLET

1-1/4" tube outlet for 1-1/4" slip joint connection.

SUGGESTED SPECIFICATIONS

Both fountains shall include pushbar on the
front. Both shall include contour-formed basins
to eliminate splashing and standing water, and
shall have rounded corners and edges. Each
projector shall be two-stream, mound-building
type with integral hood guard and anti-squirt
feature. Fountain shall comply with ANSI 117:1
and ADA for visual and motion disabilities. The
manufacturer shall certify the unit to meet the
requirements of ANSI/NSF 61, and the Safe
Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Stainless Steel

Optional Finishes (extra cost)

■■

Aztec Gold

■■

Galaxy Gray Marblyte™(Bowl Only)

■■

Black Onyx Marblyte™(Bowl Only)

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

■■

Easy-Flex™Bubbler

■■

Cane Apron

■■

Water Filter (2 recommended)

Each OVL-II™ESBP consists of 1 carton
of the following:

Fountain, Panel and Misc. Parts

Trap and service stop not included.

Copper tube to water supply connection not
furnished

Shipping weight: 55 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B5 / 8-2007

MODEL OVL-II™ESBP

Barrier-Free Fountain

OVL-II™Bi-Level

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

OVL-II™ESBP

OVL-II™Barrier-Free
Bi-Level Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of plumbing.
Mount wall plate assembly to wall per the
installation instructions. Hang fountain panel
over the wall plate assembly. Attach fountains
to wall plate assembly. Water service line and
waste line are to be assembled as required.
Final check for leaks and correct functions of
fountain should be made. (For details see the
installation instructions.)

Installation requires trap to be installed
in wall. A service supply stop must be
installed at the fountain inlet line. Trap
and service stop not included.

CAUTION –

Fountain must be securely

bolted to wall.

For wall support required locations see
installation instructions provided with
panel and fountains.

OPERATING PRESSURES:

Supply water - 105 psi maximum

WALL LINE

18"

457mm

27"

686mm

ADA

REQUIREMENT

7"

178mm

33"

838mm

5/8"

16mm

13 5/16"
338mm

2 5/16"
59mm

7"
178mm

9 7/8"
251mm

18 3/4"
476mm

WALL PLATE
ASSEMBLY

"C"

"A"

"B"

"B"

"A"

LEGEND:
A = 1-1/4" O.D. WASTE TUBE (TRAP AND ELBOW NOT PROVIDED)
B = 3/8" O.D. UNPLATED COPPER TUBE CONNECT (WATER INLET)
C = 1/4" (6mm) DIA. HOLES FOR MOUNTING PLATE TO WALL

34 5/8"
879mm

1/2"
13mm

28 1/2"
724mm

1/2"
13mm

8"
203mm

18 3/4"
476mm

25 3/4"
654mm

6"
152mm

27 1/2"
698mm

33 5/8"
854mm

31 7/8"
809mm

6"
152mm

BACK PANEL

3/8" DIA (20)
10mm

2" X 3-1/2" SLOT FOR A & B (2)

- STUDS REQUIRED FOR
FRAME WALL
CONSTRUCTION

*

*

*

*

*

43 5/8"
1108mm

8"
203mm

5 1/4"
133mm

5 1/4"
133mm

16"
406mm

16"
406mm

8"
203mm

8"
203mm

5 1/4"
133mm

5 1/4"
133mm

2 3/4"
70mm

TOP VIEW

SIDE VIEW

WALL LAYOUT

*ADA Requirement