Halsey Taylor HVR8BLFR-Child ADA User Manual

This water cooler is certified to

NSF/ANSI 61.

GENERAL

Self-contained, electric refrigerated, bi-level
wall-mounted water cooler designed to be easily
accessible to physically challenged individuals.
When properly installed, unit on right side meets
state and federal requirements for both children
and adults as defined by the Americans with
Disabilities Act. Unit is certified to NSF/ANSI 61,
and meets requirements of the Safe Drinking
Water Act. Unit provides 50° F water at 80° F
inlet water and 90° F ambient. Unit is UL listed

for indoor and outdoor service.

CABINET

Stainless steel panels resist wear and corrosion.
Durable Satin Finish helps hide water spots
and fingerprints.

COOLER TOP

Non-corrosive stainless steel cooler top,
number 300 series with satin finish resists
stains and corrosion and is easy to maintain.
Anti-splash ridge reduces splatter. Contoured
to insure proper drainage.

BUBBLER

Vandal-resistant bubbler is one-piece,
chrome-plated, with integral hood guard
design to prevent contamination from other
users, airborne deposits and tampering.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

TEMPERATURE CONTROL

Positive sensing thermostat for controlling
temperature of storage tank water. Factory set
at 50° F Adjustable ± 5° F.

STORAGE TANK

Stainless steel evaporator/storage tank for long
life. Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the Safe
Drinking Water Act.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and fan cooled
copper/aluminum condenser with self­lubricated bearing. System uses R134A
refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.

VENTILATION

Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.

SUGGESTED SPECIFICATIONS

Shall deliver 7.8 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Shall have
stainless steel basin with removable drain
strainer. Bubbler shall be one-piece, vandal­resistant type. Separate valve and automatic
stream regulator shall be mounted within
cabinet. Refrigeration system shall employ high
efficiency, positive start compressor using
R134A, evaporator/tank with totally
encapsulated insulation and be controlled by
positive sensing thermostat. Cooler shall
comply with ANSI 117:1 and ADA for visual
and motion disabilities. The manufacturer shall
certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act.
Unit complies with ARI Standard 1010.

NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.

Stainless Steel Finish Only

Optional Accessories (extra cost)

■■

Water Filter**

■■

Cane Touch Apron

■■

Frost-Resistant Model

(Factory Installed Only - HVR8BLFR-CHILD ADA)

■■

220-240V 50Hz

■■

220-240V 60Hz

■■

Louver Screens

** Water filter option not available for

frost-resistant models

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

A11 / 7-2006

MODEL:■■HVR8BL-CHILD ADA

■■

HVRBL-L/R-CHILD ADA

halseytaylor.com

HVR BARRIER-FREE SERIES

Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt

Ambient Air Temp

Cap. lb. Usage

70°F 80°F 90°F

†

100°F

HVR8BL-Child ADA 9.4 8.6 7.8 7.0 7.8 4.0 94 370
HVR8BLFR-Child ADA 9.4 8.6 7.8 7.0 7.8 6.2 96 620
HVR8BL-Child ADA 220-240V 50 Hz 7.9 7.2 6.5 5.9 6.5 2.0 94 370
HVR8BL-Child ADA 220-240V 60 Hz 9.4 8.6 7.8 7.0 7.8 2.0 94 370

* With projector service and tap water at 80° F

†

UL listed and complies with ARI Standard 1010

Trap and service stop not included

Barrier-Free Cooler

Indoor/Outdoor

Bi-Level

Vandal-Resistant

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

HVR8BL-CHILD ADA,
HVRBL-L/R-CHILD ADA

Bi-Level Vandal-Resistant
Indoor/Outdoor
Barrier-Free Cooler

(CONTINUED)

MOUNTING HEIGHT

Mounting height recommended 31

13

/

16" from

basin to floor. May be mounted at any desired
height. Check local codes.

MOUNTING INSTRUCTIONS

Mount trap and install service stop to building
supply line. Anchor hanger bracket securely to
wall on all sides. To insure proper engaging of
waste line into trap, centerline of trap must be
4

1

/

8" from wall face. Remove slip nut and gasket

from trap and install on waste line tube. Hang
cooler on bracket and engage waste line tube
into trap inlet. Centerline height of waste outlet
will vary from floor line depending on mounting
height. Install

3

/

8" supply tube to in-line strainer.

Secure bottom of cooler to wall using holes
provided.

Trap and service stop not included.

OPERATING PRESSURES:

Supply water - 105 psi maximum. Minimum
40 psi supply line pressure required in special
circumstances when both sides of bi-level are
in use simultaneously to ensure adequate
stream height. Does not apply to non­refrigerated units. For water filtered bi-level
units it is preferable to install two single filtered
units to obtain adequate stream height
regardless of pressure.

ELECTRICAL

120 Volt / 60 Hz units furnished with plug-in,
3 wire grounding type service cord. Standard
120 volt, 60 Hz, single phase. Install 120 volt
receptacle rated at 15-amp minimum to
receive 3-wire parallel blade grounding type
male plug. 220-240 Volt units furnished with
universal plug receptacle.

FRONT VIEW / WALL LAYOUT

SIDE VIEW

LEGEND:

A = RECOMMENDED WATER SUPPLY

LOCATION. SHUT OFF VALVE (NOT
FURNISHED) TO ACCEPT 3/8" O.D.
UNPLATED COPPER TUBE.

B = RECOMMENDED LOCATION FOR WASTE

OUTLET 1-1/4" O.D. DRAIN
C = 1-1/2" TRAP NOT FURNISHED
D = ELECTRICAL SUPPLY (3) WIRE

RECESSED BOX
E = INSURE PROPER VENTILATION BY

MAINTAINING 6" (152 mm) (MIN.)
CLEARANCE FROM CABINET
LOUVERS TO WALL.

F = 5/16 BOLT HOLES FOR FASTENING UNIT

TO WALL

NOTE: A service supply stop must be installed at the cooler inlet tube.

* Adult ADA requirement. 24" (608mm) for child ADA.

Adjust other measurements accordingly.