These water coolers are certified to
NSF/ANSI 61.
GENERAL
Self-contained, electric refrigerated wall-mounted
bi-level water cooler with softly rounded corners
and edges, designed to be easily accessible to
physically challenged individuals. When properly
installed, unit meets state and federal requirements as defined by the Americans with
Disabilities Act for both children or adults.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.
CABINET
Molded two-tone gray space-age polymer with
softly rounded edges. Resistant to impact, wear,
corrosion, heat and sunlight.
COOLER TOP
Non-corrosive stainless steel cooler top,
number 300 series with satin finish resists
stains and corrosion and is easy to maintain.
Anti-splash design reduces splatter. Contour
design and integral strainer insure proper drainage.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars require
minimal pressure to activate.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
SOLENOID VALVE / INLET STRAINER
Self-closing solenoid valve includes easily
cleaned in-line strainer that screens particles
of 140 microns or larger before they enter
the waterway.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling
temperature of storage tank water. Factory set
at 50° F Adjustable ± 5° F.
STORAGE TANK
Stainless steel evaporator/storage tank for long
life. Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the Safe
Drinking Water Act.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.
VENTILATION
Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.
SUGGESTED SPECIFICATIONS
Shall deliver 7.6 GPH of 50° F water at
90° F ambient and 80° F inlet water. Shall
have stainless steel basin with integral drain
strainer. Bubbler shall be two-stream, mound
building type. Separate valve and automatic
stream regulator shall be mounted within
cabinet. Refrigeration system shall employ
high efficiency, positive start compressor
using R134A, evaporator tank with
totally encapsulated insulation and be
controlled by positive sensing thermostat.
Shall have push-bar water controls. Cooler
shall comply with ANSI 117:1 and ADA for
visual and motion disabilities. The
manufacturer shall certify the unit to meet the
requirements of NSF/ANSI 61 and the Safe
Drinking Water Act. Unit complies with ARI
Standard 1010.
NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.
Standard finish is Two-Tone Gray Molded.
Optional Accessories (extra cost)
■■
Water Filter
■■
Easy-Flex™Bubbler
■■
MLP200 In-Wall Support Carrier
■■
Glass Filler (Factory installed only)
■■
Cane Touch Apron
■■
Vandal-Resistant Kit
For Stainless Steel Applications Use:
■■
HAC8FSBL-Q CHILD SS
Optional Features:
■■
Personalized Graphics
(Contact your local representative)
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A5 / 12-2008
MODEL:■■HTV8BL-Q
■■
HTV-DDBL-L/R (Less Refrigeration)
Bi-Level
Barrier-Free Cooler
halseytaylor.com
HTV-Q BARRIER-FREE SERIES
Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt
Ambient Air Temp
Cap. lb. Usage
70°F 80°F 90°F†100°F
HTV8BL-Q 9.6 8.8 7.6 7.2 7.6 4.0 78 370
* With projector service and tap water at 80° F
†
UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE: