Halsey Taylor HTSEBP User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Two face-mounted fountains, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contour­formed basins with rounded corners and edges
reduces splatter, insures proper drainage and
prevents standing waste water. Designed to be
easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for
installation in public areas. Model meets state
and federal requirements as defined by the
Americans with Disabilities Act.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self-closing, light-touch push bars with raised
letters for the visually impaired.

PANEL

Constructed of stainless steel, No. 300 series
with satin finish.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

WATER INLET

3/8" O.D. Tubing

DRAIN OUTLET

1-1/4" tube outlet for 1-1/4" slip joint connection.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbars on the front,
contour-formed basins to eliminate splashing and
standing water, and shall have rounded corners
and edges. Each projector shall be two-stream,
mound-building type with integral hood guard and
anti-squirt feature. Fountain shall comply with
ANSI 117:1 and ADA for visual and motion
disabilities. The manufacturer shall certify the unit
to meet the requirements of NSF/ANSI 61, and
the Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Stainless Steel

Optional Accessories (extra cost)

■■

Cane Touch Apron

■■

Vandal-Resistant Kit

■■

Easy-Flex™Bubbler

Each HTSEBP consists of 1 carton
of the following:

Fountain, Panel and Misc. Parts

Trap and service stop not included.

Copper tube to water supply connection not
included

Shipping weight: 59 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B17 / 1-2005

MODEL: ■■HTSEBP

Barrier-Free Fountain

Bi-Level

Classic™Series

www.halseytaylor.com

Halsey Taylor Barrier-Free Drinking
Fountains and Water Coolers conform
to The Americans with Disabilities Act
and American National Standards
Institute Specifications.

Printed in the U.S.A.

Classic™Series
Barrier-Free
Bi-Level Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of plumbing.
Mount wall plate assembly to wall per the
installation instructions. Hang fountain panel
over the wall plate assembly. Attach fountains
to wall plate assembly. Water service line and
waste line are to be assembled as required.
Final check for leaks and correct functions of
fountain should be made. (For details see the
installation instructions.)

Installation requires trap to be installed
in wall. A service supply stop must be
installed at the fountain inlet line. Trap
and service stop not included.

CAUTION – Fountain must be securely

bolted to wall.

OPERATING PRESSURES:

Supply water - 105 psi maximum

Important: For wall support required locations
see installation instructions provided with
panel and fountains.

FRONT VIEW

WALL LAYOUT

SIDE VIEW