Halsey Taylor HTSBPFR User Manual

This fountain is Classified by

Underwriters Laboratories, Inc.
in accordance with ANSI/NSF 61,
Section 9 - 1997b.

GENERAL

Face-mounted fountain, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contour­formed basin with rounded corners and edges
reduces splatter, insures proper drainage and
prevents standing waste water.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self closing, vandal-resistant pushbutton does
not require grasping or twisting.

PANEL

Constructed of stainless steel, No. 300 series
with satin finish.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns o r l a r g e r b e f o r e t h e y
enter the waterway.

WATER INLET

3/8˝ O.D. Tubing into freeze-resistant box.

DRAIN OUTLET

1-1/4˝ waste outlet located in freeze-resistant
valve system.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front
and contour-formed basin to eliminate splashing
and standing water, and shall have rounded
corners and edges. Projector shall be two­stream, mound-building type with integral hood
guard and anti-squirt feature. The manufacturer
shall certify the unit to meet the requirements of
ANSI/NSF 61, Section 9 and the Safe Drinking
Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.

Standard finish is Stainless Steel

Optional Accessories (extra cost)

■■

Cane Apron

■■

Vandal-Resistant Kit

Each HTSBPFR consists of 2 cartons of the
following:

Fountain, Panel and Misc. Parts
Freeze-Resistant Valve System

Service stop not furnished.

Copper tube to water supply connection not
furnished

Shipping weight: 42 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D16 / 9-2002

MODEL:■■HTSBPFR

Fountain With Back Panel

Classic™ Series Face-Mounted

Freeze-Resistant

www.halseytaylor.com

Printed in the U.S.A.

Freeze-Resistant
Classic™Series
Face-Mounted Fountain
With Back Panel

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of freeze-resistant
system and plumbing. For wall support required
locations see installation instructions provided
with fountain. Mount panel hanger bracket to wall
per the installation instructions. Hang fountain
panel to wall and attach fountain to panel and
wall. Water service line and waste line are to be
assembled as required. Final check for leaks and
correct functions of fountain should be made.
(For details see the installation instructions.)

CAUTION – Fountain must be securely

bolted to wall

OPERATING PRESSURES

Supply water-105 psi maximum
IMPORTANT: For wall support required

locations see installation instructions provided
with panel and fountain.

NOTE: A service supply stop should be installed
at the fountain inlet line.

FRONT VIEW

TOP VIEW

SIDE VIEW

WALL LAYOUT