Halsey Taylor HTHBWF-OVL-RF User Manual

Satisfying Thirsts Since 1912

PRODUCT SPECIFICATION

In-wall HTHBWF-OVL-RF Retro-t system will update existing re­frigerated Bi-Level OVL installations with an integrated Bottle Filler
system. Units shall be stainless steel construction with plastic ABS
alcove. Sensor activation with an auto 20-second shut-off timer.
Shall include Green Counter™ displaying count of plastic bottles
saved from waste. Bottle ller shall provide 1.1 gpm ow rate with
laminar ow to minimize splashing. Shall include integrated silver
ion anti-microbial protection in key areas. Bottle ller meets ADA
guidelines for reach range; fountain meets ADA guidelines for
wheelchair access. Unit shall be lead-free design which is certied
to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2
No. 120.

STANDARD FEATURES

Bottle Filler

• No-touch, sensor-activated operation.

• Auto 20-second shut-off.

• WaterSentry® Plus 3000-gallon capacity Filtration System,
certied to NSF/ANSI 42 & 53 (Lead, Class 1 Particulate,
Chlorine, Taste & Odor).

• Integrated Silver Ion Anti-microbial Protection in key areas.

• Quick Fill Rate: 1.1 gpm.

• Laminar Flow provides minimal splash.

• Real Drain System eliminates standing water.

• Visual User Interface display includes:

• Innovative Green Counter™ counts bottles saved from waste.

• LED Visual Filter Monitor shows when lter replacement is

necessary.

FOUNTAINS / COOLING SYSTEM

One fountain, one mounting frame (for lower fountain installation)
and the cooling system are reused from the current existing
installation.

Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:

• 55898C (single)

• 55898C (3PK (three)

• 55898C_12PK (twelve)

• 55898C_24PK (twenty-four)

• 55898C_48PK (forty-eight)

CAPACITIES CHART

HydroBoost™ In-Wall Bottle Filling Station

Retro-t Model for

Filtered OVL-II™ Refrigerated Fountain

Model HTHBWF-OVL-RF

RATED FOR INDOOR USE ONLY

Model

HTHBWF-OVL-RF

CONSTRUCTION

• Stainless steel bottle ller construction with ABS plastic alcove.

• Includes ventilating louvered grille with fountain.

• Furnished with open wall frame mounting box constructed of
galvanized steel.

Each HTHBWF-OVL-RF is shipped in one carton containing:

• Upper panel with installed bottle ller

• Lower panel with ventilation louvers

• Mounting frame for bottle ller
WaterSentry® Plus Filter

• Misc. hardware

Warranty: Electrical components and water system are warranted
for 12 months from date of installation or 18 months from factory
shipment, whichever date falls rst.

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied

• ANSI/NSF 61 and 372 Certied

• ANSI/NSF 42 and 53 Certied (Filter only)

• GreenSpec® Listed

Model

HTHBWF-OVL-RF

The above ratings apply only to the HTHBWF-OVL-RF unit.
Ratings for cooler not included.

In keeping with our policy of continuing product
improvement, Halsey Taylor reserves the right to change

specication without notice. Please visit halseytaylor.com

Voltage /

Hertz

115V /

60Hz

Chilling

Capacity

Based on

Existing

Cooler
Rating

F.L.

Amps

Rated
Watts

1.0 15 55

Approx.

Ship

Weight.

This specication describes an Elkay product with design, quality
and functional benets to the user. When making a comparison of
other producer’s offerings, be certain these features are not over­looked.

2222 Camden Court
OakBrook, IL 60523

630-572-3192

SPEC00131 (Rev 09/2014)

2014 Halsey Taylor

Model HTHBWF-OVL-RF
HydroBoost™ In-Wall Bottle Filling Station

Retro-Fit Model for
Filtered OVL-II™ Refrigerated Fountain

(continued)

Job Name: ____________________________________
Date: ________________________ Qty. ____________
Contact Info (Name, Phone, Email): ________________
_____________________________________________
_____________________________________________
Approval: _____________________________________

INSTALLATION STEPS

Disassemble current Bi-Level Refrigerated
fountain installation

Remove left hand mounting frame, replace
with new open frame (included)

IMPORTANT!

*Rated for indoor use only

HTHBWF-OVL-RF Retro-t is designed to t on an existing OVL refriger­ated style fountain which is properly installed per the Spec Sheet rough-in
information.

ELECTRICAL

HTHBWF-OVL-RF equipped with electrical cord and three-prong molded rubber

plug for use with 15-amp minimum receptacle. Rated at 115V/60Hz, single phase.

Reassemble installation with new upper panel / Bottle Filler as­sembly, original fountain, original lower mounting frame, chiller
shelf, chiller unit and new lower panel assembly

Typical current installation with fountains
and panels removed

BOTTLE FILLER / FOUNTAIN INSTALLATION AFTER RETRO-FIT CONVERSION

38 1/2"
978mm

22 15/16"

22 15/16"

583mm

583mm

17 7/8"
455mm

Activation
Sensor

30 1/8"
764mm

9 7/8"
250mm

18 3/4"
476mm

30 1/8"
764mm

34"
864mm

*

7 1/16"
180mm

27"
686mm

11"
279mm

A

17 5/16"
440mm

5/8"
16mm

4 1/2"
114mm

23 5/16"
592mm

28 1/2"
724mm

FINISHED FLOOR

2014 Halsey Taylor
SPEC00131 (Rev 09/2014)

2222 Camden Court
Oak Brook, IL 60523

halseytaylor.com

Printed in U.S.A.

©2014 Halsey Taylor