Halsey Taylor HTHBWF-HRF-RF User Manual
Satisfying Thirsts Since 1912
PRODUCT SPECIFICATION
In-wall HTHBWF-HRF-RF Retro-t system will update existing refrigerated Bi-Level HRF installations with an integrated Bottle Filler
system. Units shall be stainless steel construction with plastic ABS
alcove. Sensor activation with an auto 20-second shut-off timer.
Shall include Green Counter™ displaying count of plastic bottles
saved from waste. Bottle ller shall provide 1.1 gpm ow rate with
laminar ow to minimize splashing. Shall include integrated silver
ion anti-microbial protection in key areas. Bottle ller meets ADA
guidelines for reach range; fountain meets ADA guidelines for
wheelchair access. Unit shall be lead-free design which is certied
to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2
No. 120.
STANDARD FEATURES
Bottle Filler
• No-touch, sensor-activated operation.
• Auto 20-second shut-off.
• WaterSentry® Plus 3000-gallon capacity Filtration System,
certied to NSF/ANSI 42 & 53 (Lead, Class 1 Particulate,
Chlorine, Taste & Odor).
• Integrated Silver Ion Anti-microbial Protection in key areas.
• Quick Fill Rate: 1.1 gpm.
• Laminar Flow provides minimal splash.
• Real Drain System eliminates standing water.
• Visual User Interface display includes:
• Innovative Green Counter™ counts bottles saved from waste.
• LED Visual Filter Monitor shows when lter replacement is
necessary.
FOUNTAINS / COOLING SYSTEM
One fountain, one mounting frame (for lower fountain installation)
and the cooling system are reused from the current existing
installation.
Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:
• 55898C (single)
• 55898C (3PK (three)
• 55898C_12PK (twelve)
• 55898C_24PK (twenty-four)
• 55898C_48PK (forty-eight)
CAPACITIES CHART
Model
Voltage /
Hertz
Chilling
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Weight.
HydroBoost™ In-Wall Bottle Filling Station
Retro-t Model for
Filtered HRF Refrigerated Fountain
Model HTHBWF-HRF-RF
RATED FOR INDOOR USE ONLY
Model
HTHBWF-HRF-RF
CONSTRUCTION
• Stainless steel bottle ller construction with ABS plastic alcove.
• Includes ventilating louvered grille with fountain.
• Furnished with open wall frame mounting box constructed of
galvanized steel.
Each HTHBWF-HRF-RF is shipped in one carton containing:
• Upper panel with installed bottle ller
• Lower panel with ventilation louvers
• Mounting frame for bottle ller
• WaterSentry® Plus Filter
• Misc. hardware
Warranty: Electrical components and water system are warranted
for 12 months from date of installation or 18 months from factory
shipment, whichever date falls rst.
CERTIFICATIONS / STANDARDS
• ADA Compliant
• UL399 and CAN/CSA 22.2 No. 120 Certied
• ANSI/NSF 61 and 372 Certied
• ANSI/NSF 42 and 53 Certied (Filter only)
• GreenSpec® Listed
HTHBWF-HRF-RF
The above ratings apply only to the HTHBWF-HRF-RF unit.
Ratings for cooler not included.
In keeping with our policy of continuing product
improvement, Halsey Taylor reserves the right to change
specication without notice. Please visit halseytaylor.com
115V /
60Hz
Based on
Existing
Cooler
Rating
1.0 15 55
This specication describes an Halsey Taylor product with design,
quality and functional benets to the user. When making a comparison of other producer’s offerings, be certain these features are
not overlooked.
2222 Camden Court
OakBrook, IL 60523
630-572-3192
SPEC00133 (Rev 09/2014)
2013 Halsey Taylor
Model HTHBWF-HRF-RF
HydroBoost™ In-Wall Bottle Filling Station
Retro-Fit Model for
Filtered HRF Refrigerated Fountain
(continued)
Job Name: ____________________________________
Date: ________________________ Qty. ____________
Contact Info (Name, Phone, Email): ________________
_____________________________________________
_____________________________________________
Approval: _____________________________________
INSTALLATION STEPS
Disassemble current Bi-Level Refrigerated
fountain installation
Remove left hand mounting frame, replace
with new open frame (included)
IMPORTANT!
HTHBWF-HRF-RF Retro-t is designed to t on an existing HRF refrigerated style fountain which is properly installed per the Spec Sheet rough-in
information.
ELECTRICAL
HTHBWF-HRF-RF equipped with electrical cord and three-prong molded rubber
plug for use with 15-amp minimum receptacle. Rated at 115V/60Hz, single phase.
Reassemble installation with new upper panel / Bottle Filler assembly, original fountain, original lower mounting frame, chiller
shelf, chiller unit and new lower panel assembly
*Rated for indoor use only
Typical current installation with fountains
and panels removed
BOTTLE FILLER / FOUNTAIN INSTALLATION AFTER RETRO-FIT CONVERSION
38 1/2"
978mm
18 13/16"
478mm
12 1/8"
308mm
3 13/16"
97mm
Activation
Sensor
30 1/16"
764mm
17 7/8"
455mm
9 13/16"
249mm
33 7/16"
849mm
1 1/2"
38mm
27"
686mm
ADA
REQUIREMENT
18 5/8"
473mm
5/8"
16mm
A
31 1/4"
794mm
FINISHED FLOOR
2014 Halsey Taylor
SPEC00133 (Rev 09/2014)
2222 Camden Court
Oak Brook, IL 60523
halseytaylor.com
4 1/2"
114mm
Printed in U.S.A.
©2014 Halsey Taylor
Loading...