Halsey Taylor HTHBSM User Manual
Filterless
H
YDROBOOST
™
MODELS: HTHBSM
* Rated for Indoor Use Only
These water coolers are certified to
NSF/ANSI 61.
GENERAL
Botte Filling Station designed for mounting
directly onto a wall surface for applications with
limited wall depth. When properly installed, unit
meets the reach range guidelines as defined
by the American with Disabilities Act (ADA).
If desired, unit can be paired with a remote
chiller to provide a chilled drink of water.
BOTTLE FILLING
Quick fill rate is 1.5 gallons per minute and
1.1 gallons per minute when paired with remote
chiller. Laminar flow provides a clean fill with
minimal splash and easy maintenance.
SENSOR ACTIVATED
User interface design makes touchless operation
intuitive. Equipped with automatic 20-second
shut-off timer.
SILVER ION ANTI-MICROBIAL
PROTECTION
Key plastic components are integrated with
silver ion anti-microbial protection to inhibit
growth of mold and mildew.
Surface Mount
Bottle Filling Station
HTHBSM
Ships in a single carton
GREEN COUNTER™
Visually displays count of 20 oz. plastic bottles
saved from landfills.
MOUNTING
Includes a sturdy hanger bracket to provide
proper support of the unit on the wall surface.
SUGGESTED SPECIFICATIONS
Bottle Filling unit shall be designed to mount
directy on the wall surface. Constructed of
18 gauge Type 300 series stainless steel and
ABS plastic. Shall include electronic sensor
for no-touch activation with automatic 20-second
shut-off timer. Shall provide 1.1-1.5 gpm flow
rate with laminar flow to minimize splashing.
Shall include antimicrobial protect plastic
components to pr event mold and mildew.
Shall meet ADA guidelines for reach ranges,
when properly installed. Shall be lead-free
design which meets Safe Drinking Water Act
and is certified to NSF/ANSI 61 and California
AB1953. Shall be certified to UL399 and
CAN/SA 22.2 No. 120.
.
NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
halseytaylor.com
THIRD-PARTY CERTIFIED TO:
* UL399 & CAN/CSA 22.2 NO. 120
* NSF/ANSI 61-ANNEX G, AB 1953
9-2011
MODEL HTHBSM
Filterless
HYDROBOOS
T
™
Surface Mount
Bottle Filling Station
* Rated for Indoor Use Only
D
9 1/2"
241mm
25 7/16"
646mm
12"
305mm
D
7"
178mm
D
OPERATING PRESSURES:
Supply water - 20 to 105 psi maximum
17 13/16"
453mm
7"
178mm
D
D
B
A
3 1/16"
77mm
46 7/16"
1180mm
ELECTRICAL:
Hydroboost station equipped with electric
cord and three-prong molded rubber plug for
use with 15-amp minimum receptacle.
Rated at 115 volt, 60Hz, single phase.
8 3/16"
208mm
5 3/8"
136mm
2 7/8"
73mm
D
34 7/16"
875mm
32 15/16"
837mm
1 3/8"
35mm
FINISHED
WALL
27"
686mm
28"
712mm
8 7/8"
225mm
6 1/4"
159mm
120V POWER CORD
(18" MIN. LENGTH)
FINISHED FLOOR
33 1/2"
851mm
30 1/16"
763mm
C
FIG. 1
LEGEND:
A = RECOMMENDED WATER SUPPLY LOCATION ; 1/2" IPS MAXIMUM PIPE SIZE. SERVICE STOP VALVE NOT FURNISHED.
B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. MAXIMUM PIPE SIZE.
C = ELECTRICAL OUTLET, THREE (3) CONDUCTOR GROUNDED. LOCATE WITHIN SAFE REACH OF POWER CORD.
D = 7/16" X 3/4" OBROUND MOUNTING HOLES FOR FASTENING BACKPLATE TO WALL.
Specifications and measurements are subject to change without notification.
Please visit halseytaylor.com for most current version.
Printed in the U.S.A.
Loading...