Halsey Taylor HTHB-HVRGRN8-NF User Manual

Satisfying Thirsts Since 1912

Model HTHB-HVRGRN8-NF

Single HVR Green Cooler with

Hydroboost® Bottle Filler

MODEL: HTHB-HVRGRN8-NF

GENERAL

Complete water station including HydroBoost® bottle lling
station and HVR Green Single water cooler.
GreenSpec® Listed, energy and water efcient single water
cooler model. Self-contained, wall-mounted, electric,
refrigerated model. One-piece chrome-plated vandal-resistant
water conservation bubbler with integral hood. Automatic stream
height regulator is located inside unit to prevent tampering.
Includes self-closing, light touch front pushbutton actuation. Type

300 series stainless steel cooler top, with satin nish resists

stains. Anti-splash ridge reduces splatter. Contoured to insure
proper drainage.

HYDROBOOST® BOTTLE FILLING STATION

Sensor-activated enhanced with user interface graphics. Quick

ll rate is 1.1 gallons per minute. Laminar ow provides a clean
ll with minimal splash and easy maintenance. Equipped with an

automatic 20-second shut-off timer.

SILVER ION ANTI-MICROBIAL PROTECTION

Key plastic components are integrated with silver ion
anti-microbial protection to inhibit growth of mold and mildew.

GREEN COUNTER™

Visually displays count of plastic bottles saved from the landlls.

(Based on 20 oz. bottles for refrigerated models)

HVR Green Cooler

with Bottle Filler

*Rated for Indoor Use Only

Model
HTHB-HVRGRN8-NF

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does not require

grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to prevent tampering.
Unit resists corrosion and liming. A constant stream height is
automatically maintained under line pressures that vary from
20 to 105 psi.

WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/4”
tube outlet for 1-1/4” slip joint connection. Trap and service stop

not included.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor with lifetime

lubrication and built-in overload protection, efcient capillary

sizing, large capacity dryer-strainer and self-lubricated fan cools
copper/ aluminum condenser. System uses R-134A refrigerant.
Protected by Halsey Taylor’s Limited 5 Year Warranty.

CAPACITIES CHART

Model
No.

HTHB-HVRGRN8-NF 9.7 8.8 8.0 7.2 8.0 3.8 89 260

NOTE: Continued product improvement makes specication sheets subject to change without notice.

** With projector service and tap water at 80°F

t

UL 399 and ASHRAE (previously ARI 1010) compliant

GPH Capacity Cooled to 50°F** Base

Ambient Air Temp

70°F 80°F 90°F

t

100°F

SUGGESTED SPECIFICATION

Unit shall include a single water cooler with a bottle lling
station. Units shall have a high-efciency refrigeration

system and deliver 8 GPH of 50°F drinking water at 90°F
ambient air and 80°F inlet water. Lower unit shall have

mechanically activated pushbutton activation. Bottle ller shall

include electronic sensor for no-touch activation with
automatic 20-second shut-off timer. Shall include a
Green Counter™ displaying the count of plastic bottles

saved from the landll. Shall provide 1.1 gpm with laminar
ow to minimize splashing. Shall include anti-microbial

protected plastic components to prevent mold and mildew.
Cooler shall have stainless steel cabinet and basin. Cooler
shall include removable drain strainer. Shall comply with
ADA guidelines for visual and motion disabilities. The

manufacturer shall certify the unit to meet the requirements of

NSF/ANSI 61 and 372, UL 399 and CAN/CSA 22.2 No. 120.

Rate
Cap.

F.L.

Amps

Shipping

Weight

lb.

Rated

Watt

Usage

HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523

halseytaylor.com

SPEC00219 09/2014

Model HTHB-HVRGRN8-NF
Single HVR Green Cooler with
Hydroboost® Bottle Filler

1/4” O.D. TUBE

WATER INLET

TO COOLER

OPERATION OF QUICK CONNECT FITTINGS

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE TO ATTACH

A B C

52 1/16"
1323mm

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

B CA

ACTIVATION
SENSOR

39 1/16"
991mm

31"
787mm

SERVICE STOP

(NOT FURNISHED)

TUBE IS SECURED

TUBE IS SECURED

IN POSITION

IN POSITION

7/16"

O

11mm

MOUNTING HOLES

(6)

5/16" (8mm) DIA. (5 HOLES)

25"
635mm

21 3/8"
543mm

BUILDING WATER

PUSH IN COLLET

PUSH IN COLLET

TO RELEASE TUBE

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

PULLING IT OUT HELPS TO

RELEASE TUBE

RELEASE TUBE

5 3/4"
146mm

1 3/8"
35mm

E

18 3/8"
467mm

INLET

NOTE: A service stop (not included) must be installed at
the water inlet line.

NOTE: P-Trap (not supplied) to be installed per local
building code.

Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.

OPERATING PRESSURES

Supply water - 105 psi maximum

Minimum 40 psi supply line pressure required

in special circumstances where both sides of
bi-level are in use simultaneously to ensure

adequate stream height. Use of water lter in

this situation is not recommended.

FRONT VIEW SIDE VIEW

17 7/8"

ELECTRICAL

454mm

7"
178mm

B

D

A

5"
127mm

C

L

7"
178mm

11/16"
18mm

2 7/16"
63mm

4 1/2"
114mm

10"
254mm

2 1/2"
64mm

3 1/2"
89mm

4 9/16"
116mm

F

13 7/8"
352mm

5 3/4"
146mm

1 3/8"
35mm

E

7 1/4"
185mm

2 9/16"
65mm

15"
381mm

3 3/16"
82mm

FINISHED FLOOR

32 15/16"
837mm

ORIFICE
HEIGHT

2 5/8"
67mm

31 13/16"
808mm

RIM HEIGHT

REQUIREMENTS

27"

686mm

ADA

3 9/16"
90mm

18 1/2"
471mm

HANGER BRACKET

C

6 1/4"
159mm

12 5/16"
313mm

1 1/2"
38mm

6 3/4"
172mm

18 7/8"
479mm

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from
cabinet louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

®

Page 2

Job Name: ____________________________________

Model: _____________________________ Qty. ______

Contact: ______________________________________

Approval Signature: _____________________________

Notes:

Printed in the U.S.A.