Halsey Taylor HTHB-HAC-RF User Manual
Satisfying Thirsts Since 1912
Model HTHB-HAC-RF
Filtered HAC Retro Fit
Hydroboost® Bottle Filler
MODEL:
GENERAL
Bottle lling station designed to retro-t existing HAC pushbar
activated models. Applicable on 115V models only. Rated for indoor
use. Supplied with basin to ensure proper t and allow for easy
installation. Ideal for use in sports and tness centers, educational
and healthcare facilities, airports, ofce buildings and many other
commercial buildings.
HYDROBOOST® RETRO-FIT BOTTLE FILLING STATION
Sensor-activated enhanced with user interface graphics. Quick ll
rate is 1.5 gallons per minute on refrigerated model or 1.1 gallons
per minute on non-refrigerated model. Laminar ow provides a
clean ll to minimize splashing and easy maintenance. Equipped
with an automatic 20-second shut-off timer.
SILVER ION ANTI-MICROBIAL PROTECTION
Key plastic components are integrated with silver ion
anti-microbial protection to inhibit growth of mold and mildew.
GREEN COUNTER™
Visually displays count of plastic bottles saved from landlls.
(Based on 20 oz. bottles for refrigerated models)
LEAD REDUCTION FILTER WITH FILTER LIFE INDICATOR
Equipped with the HWF3000 WaterSentry® Plus Filter.
Quick-Disconnect, ¼ turn installation and automatic inlet shut-off
valve that closes when lter is removed. High-grade lter is made
with activated carbon and patented ATS lead-removal media.
Certied to NSF/ANSI 42 for Chlorine-Class 1, Particulate-Class
1 and Taste and Odor and NSF/ANSI 53 for Lead Reduction. Filter
is rated for a 3,000 gallon capacity.
Green, yellow and red LEDs visually indicate when lter
maintenance is required.
Replacement Filters: Available as Singles and Multi-Packs.
Order part numbers:
• 55898C (single)
• 55898C_3PK (three pack)
• 55898C_12PK (twelve pack)
• 55898C_24PK (twenty-four pack)
• 55898C_48PK (forty-eight pack)
HTHB-HAC-RF
Filtered Bottle Filler Retro-Fit
for HAC models
*Rated for Indoor Use Only
HTHB-HAC-RF
SUGGESTED SPECIFICATION
Unit shall include a bottle lling station that retrots onto a cooler.
Model HTHB-HAC-RF shall retro-t existing 115V pushbar activated
HAC models. Shall include basin to ensure proper t and function.
Bottle ller shall include electronic sensor for no-touch activation with
automatic 20-second shut-off timer. Shall include a Green Counter™
displaying the count of plastic bottles saved from the landll. Shall
include the WaterSentry® Plus 3000-gallon capacity lter, certied to
NSF/ANSI 42 for Chlorine-Class 1, Particulate-Class 1 and Taste and
Odor and NSF/ANSI 53 for lead reduction, with LED visual lter monitor
to indicate when lter maintenance is required. Shall
include anti-microbial protected components to prevent mold and
mildew. Shall comply with ADA guidelines for visual and motion
disabilities. The manufacturer shall certify the unit to meet the
requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.
CAPACITIES CHART
Model
No.
HTHB-HAC-RF - - - - - 1.0 32 120
NOTE: Continued product improvement makes specication sheets subject to change without notice.
** With projector service and tap water at 80°F
t
UL 399 and ASHRAE (previously ARI 1010) compliant
Protected by Halsey Taylor’s Limited Warranty.
Warranty details available at halseytaylor.com.
GPH Capacity Cooled to 50°F** Base
Ambient Air Temp
70°F 80°F 90°F
HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523
t
100°F
halseytaylor.com
Rate
Cap.
F.L.
Amps
Shipping
Weight
lb.
Rated
Usage
SPEC00217 09/2014
Watt
Model HTHB-HAC-RF
Filtered HAC Retro Fit
HydroboosT® Bottle Filler
OPERATING PRESSURES
Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure
adequate stream height. Use of water lter in
this situation is not recommended.
FRONT VIEW SIDE VIEW
7/16"
O
11mm
MOUNTING HOLES
(6)
5 3/4"
21 3/8"
543mm
146mm
1 3/8"
35mm
18 3/8"
467mm
E
B
D
A
52 1/16"
1323mm
ACTIVATION
SENSOR
39 1/16"
991mm
5/16" (8mm) DIA. (5 HOLES)
31"
787mm
25"
635mm
NOTE: A service stop (not included) must be installed at
the water inlet line.
NOTE: P-Trap (not supplied) to be installed per local
building code.
SINGLE COOLER
17 7/8"
454mm
178mm
5"
127mm
7"
C
L
178mm
11/16"
18mm
2 7/16"
63mm
114mm
10"
254mm
7"
2 1/2"
64mm
4 1/2"
3 1/2"
89mm
4 9/16"
116mm
F
13 7/8"
352mm
146mm
1 3/8"
35mm
E
7 1/4"
185mm
2 9/16"
65mm
5 3/4"
15"
381mm
3 3/16"
82mm
FINISHED FLOOR
33"
838mm
ORIFICE
HEIGHT
ELECTRICAL
Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.
3 9/16"
90mm
18 1/2"
471mm
2 5/8"
31 13/16"
808mm
RIM
HEIGHT
67mm
27"
686mm
ADA
REQUIREMENT
8"
203mm
159mm
6 1/4"
HANGER BRACKET
C
12 5/16"
313mm
1 1/2"
38mm
6 3/4"
172mm
18 7/8"
479mm
REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).
®
Page 2
Job Name: ____________________________________
Model: _____________________________ Qty. ______
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
Printed in the U.S.A.
Loading...