Halsey Taylor HTHB-HACG8BLPV-NF User Manual

Satisfying Thirsts Since 1912

Model HTHB-HACG8BLPV-NF and

HTHB-HACG8BLSS-NF

Bi-Level HAC Green Cooler with

Hydroboost® Bottle Filler

MODELS: HTHB-HACG8BLPV-NF

HTHB-HACG8BLSS-NF

GENERAL

Complete water station including HydroBoost® bottle lling station and HAC

Green water cooler which exceeds average market energy-efciency
performance by 35% per CSA 815-99. Self-contained, high-efciency

refrigerated wall-mount water cooler. Exclusive one-piece, chrome-plated,
two-stream Double Bubbler™ with non-removeable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series

stainless steel top, with satin nish resists stains. Anti-splash ridge reduces

splatter. Contoured to insure proper drainage.

HYDROBOOST® BOTTLE FILLING STATION

Sensor-activated enhanced with user interface graphics. Quick ll rate is

1.1 gallons per minute. Laminar ow provides a clean ll with minimal splash

and easy maintenance. Equipped with an automatic 20-second shut-off timer.

SILVER ION ANTI-MICROBIAL PROTECTION

Key plastic components are integrated with silver ion
anti-microbial protection to inhibit growth of mold and mildew.

GREEN COUNTER™

Visually displays count of plastic bottles saved from waste.

DOUBLE BUBBLER™

Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s integral
hood insures a satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to prevent tampering. Unit resists
corrosion and liming. A constant stream height is automatically maintained under
line pressures that vary from 20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps particles of 140 microns or larger
before they enter the waterway.

WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/2” tube outlet for
1-1/2” slip joint connection. Trap and service stop not included.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor with lifetime lubrication

and built-in overload protection, efcient capillary sizing, large capacity

dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.

CAPACITIES CHART

HAC Green Cooler

with Bottle Filler

*Rated for Indoor Use Only

Model
HTHB-HACG8BLPV-NF

Cooler panels available in Platinum Vinyl or Stainless Steel.
(additional cost)

SUGGESTED SPECIFICATION

Unit shall include a bi-level water cooler with a bottle lling station. Unit
shall have a high-efciency refrigeration system and shall deliver 8 gph

of 50°F drinking water at 90°F ambient air and 80°F inlet water. Lower

units shall have mechanically activated pushbar activation. Bottle ller

shall include electronic sensor for no-touch activation with automatic
20-second shut-off timer. Shall include a Green Counter™ displaying

the count of plastic bottles saved from the landll. Shall provide 1.1 gpm
with laminar ow to minimize splashing. Shall include anti-microbial

protected plastic components components to prevent mold and
mildew. Cooler shall have stainless steel basin with anti-splash ridge and
removeable drain strainer. Shall have front and side pushbar activation
with raised letters. Shall comply with ADA guidelines for visual and motion
disabilities. The manufacturer shall certify the unit to meet the
requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.

Model
No.

HTHB-HACG8BL*-NF

NOTE: Continued product improvement makes specication sheets subject to change without notice.

* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F

t

UL 399 and ASHRAE (previously ARI 1010) compliant

GPH Capacity Cooled to 50°F** Base

Ambient Air Temp

70°F 80°F 90°F

t

100°F

Rate
Cap.

9.7 8.8 8.0 7.2 8.0 3.8 85 260

HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523

halseytaylor.com

F.L.

Amps

Shipping

Weight

lb.

SPEC00123 09/2014

Rated

Watt

Usage

Model HTHB-HACG8BLPV-NF and
HTHB-HACG8BLSS-NF
Bi-Level HAC Green Cooler with
Hydroboost® Bottle Filler

1/4” O.D. TUBE

WATER INLET

TO COOLER

OPERATION OF QUICK CONNECT FITTINGS

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE TO ATTACH

A B C

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

TUBE IS SECURED

TUBE IS SECURED

IN POSITION

IN POSITION

B CA

BUILDING WATER

INLET

SERVICE STOP

(NOT FURNISHED)

PUSH IN COLLET

PUSH IN COLLET

TO RELEASE TUBE

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

PULLING IT OUT HELPS TO

RELEASE TUBE

RELEASE TUBE

NOTE: A service stop (not included) must be installed at
the water inlet line.

NOTE: P-Trap (not supplied) to be installed per local
building code.

FRONT VIEW SIDE VIEW

ELECTRICAL

Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,

60 Hz, single phase.

OPERATING PRESSURES

Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure

adequate stream height. Use of water lter in

this situation is not recommended.

58 9/16"
1488mm

MOUNTING HOLES

ACTIVATION
SENSOR

45 9/16"
1157mm

952mm

O

37 1/2"

7/16"

11mm

(6)

15"

381mm

5/16" (8mm) DIA.

6 1/2"

165mm

7 1/4"

185mm

20 3/8"
518mm

5 3/4"

146mm

(10 HOLES)

1 3/8"
35mm

E

F

2 9/16"
65mm

4 9/16"
116mm

5"

127mm

7"

178mm

17 7/8"

454mm

178mm

1 3/8"

35mm

C

L

10"

254mm

FINISHED FLOOR

7"

11/16"
18mm

2 7/16"
63mm

3 9/16"
90mm

18 7/8"

18 1/16"

459mm

5 3/4"

146mm

5 3/4"

146mm

1 3/8"

1 3/8"

35mm

35mm

C

L

B

6 1/4"

159mm

3 1/2"

89mm

4 1/2"

114mm

5 3/4"

146mm

13 7/8"

352mm

D

E

A

F

18 3/4"

476mm

20 1/8"
511mm

25 1/8"

638mm

39 1/2"

1003mm

ORIFICE HEIGHT

ORIFICE HEIGHT

33"

838mm

2 5/8"
67mm

31 15/16"

811mm

RIM HEIGHT

27"

686mm

ADA

REQUIREMENT

8"

203mm

105mm

18 5/8"

472mm

HANGER BRACKET

C

4 1/8"

12 5/16"
313mm

6 3/4"

172mm

479mm

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from
cabinet louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

®

Page 2

Job Name: ____________________________________

Model: _____________________________ Qty. ______

Contact: ______________________________________

Approval Signature: _____________________________

Notes:

Printed in the U.S.A.