Halsey Taylor HTHB-HAC8WF User Manual
Satisfying Thirsts Since 1912
Model HTHB-HAC8WF and HTHB-HACDWF
Filtered Single HAC Cooler with
Hydroboost® Bottle Filler
MODELS: HTHB-HAC8WF
HTHB-HACDWF
GENERAL
Complete water station including HydroBoost® bottle lling station and HAC
water cooler. Self-contained, wall-mounted water cooler. Model
HTHB-HAC8WF delivers chilled drinking water; model HTHB-HACDWF
delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated
two-stream Double Bubbler™ with non-removeable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series
stainless steel top, with satin nish resists stains. Anti-splash ridge reduces
splatter. Contoured to insure proper drainage.
HYDROBOOST® BOTTLE FILLING STATION
Sensor-activated enhanced with user interface graphics. Quick ll
rate is 1.1 gallons per minute on refrigerated model and 1.5 gallon
per minute on non-refrigerated model. Laminar ow provides a
clean ll with minimal splash and easy maintenance. Equipped with
an automatic 20-second shut-off timer.
SILVER ION ANTI-MICROBIAL PROTECTION
Key plastic components are integrated with silver ion
anti-microbial protection to inhibit growth of mold and mildew.
GREEN COUNTER™
Visually displays count of plastic bottles saved from landlls. (Based on 20 oz.
bottles for refrigerated models.)
DOUBLE BUBBLER™
Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s integral
hood insures a satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to prevent tampering. Unit resists
corrosion and liming. A constant stream height is automatically maintained under
line pressures that vary from 20 to 105 psi.
WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/4” tube outlet for
1-1/4” slip joint connection. Trap and service stop not included.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor with lifetime lubrication
and built-in overload protection, efcient capillary sizing, large capacity
dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.
LEAD REDUCTION FILTER WITH FILTER LIFE INDICATOR
Equipped with the HWF3000 Watersentry® Plus Filter. Features
Quick-Disconnect, 1/4 turn installation and automatic inlet shut-off valve
that closes when lter is removed. High grade lter is made with
activated carbon and patented ATS lead-removal media.
Certied to NSF/ANSI 42 for Chlorine-Class 1, Particulate-Class 1 and
Taste and Odor and NSF/ANSI 53 for Lead Reduction. Filter is rated for
3,000 gallon capacity. Green, yellow and red LEDs visually indicate when
lter maintenance is required.
CAPACITIES CHART
HAC Cooler with
Bottle Filler and Filter
*Rated for Indoor Use Only
Model HTHB-HAC8WF
and HTHB-HACDWF
Cooler panels available in Platinum Vinyl or Stainless Steel.
(additional cost)
SUGGESTED SPECIFICATION
Unit shall include a single water cooler with a bottle lling station. Model
HTHB-HAC8WF shall deliver 8 gph of 50°F drinking water at 90°F
ambient air and 80°F inlet water. Model HTHB-HACDWF unit shall
deliver non-refrigerated drinking water. Lower unit shall have mechanically
activated pushbar activation. Bottle ller shall include electronic sensor
for no-touch activation with automatic 20-second shut-off timer. Shall
include a Green Counter™ displaying the count of plastic bottles saved
from the landll. Shall include WaterSentry® Plus 3000-gallon capacity
lter, certied to NSF/ANSI 42 for Chlorine-Class 1, Particulate-Class 1
and Taste and Odor and NSF/ANSI 53 for lead reduction, with LED visual
lter monitor to indicate when lter maintenance is
required. Bottle Filler shall provide 1.1-1.5 gpm with laminar ow to
minimize splashing. Shall include anti-microbial protected plastic
components to prevent mold and mildew. Cooler shall have stainless steel
basin with anti-splash ridge and removeable drain strainer. Shall have
front and side pushbar activation with raised letters. Shall comply with
ADA guidelines for visual and motion disabilities. The manufacturer shall
certify the unit to meet the requirements of NSF/ANSI 61 and 372,
UL 399 and CAN/CSA 22.2 No 120.
Replacement Filters: Available as Singles and Multi-Packs.
Order part numbers:
• 55898C (single)
• 55898C_3PK (three pack)
• 55898C_12PK (twelve pack)
• 55898C_24PK (twenty-four pack)
• 55898C_48PK (forty-eight pack)
Model
No.
HTHB-HAC8WF* 9.7 8.8 8.0 7.2 8.0 3.8 89 260
HTHB-HACDWF* - - - - - 1.0 85 120
NOTE: Continued product improvement makes specication sheets subject to change without notice.
* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F
t
UL 399 and ASHRAE (previously ARI 1010) compliant
GPH Capacity Cooled to 50°F** Base
Ambient Air Temp
70°F 80°F 90°F
t
100°F
Rate
Cap.
F.L.
Amps
Shipping
Weight
lb.
Rated
Watt
Usage
halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523
SPEC00208 09/2014
Model HTHB-HAC8WF and HTHB-HACDWF
Filtered Single HAC Cooler with
Hydroboost® Bottle Filler
OPERATING PRESSURES
Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure
adequate stream height. Use of water lter in
this situation is not recommended.
FRONT VIEW SIDE VIEW
7/16"
O
11mm
MOUNTING HOLES
(6)
5 3/4"
21 3/8"
543mm
146mm
1 3/8"
35mm
18 3/8"
467mm
E
B
D
A
52 1/16"
1323mm
ACTIVATION
SENSOR
39 1/16"
991mm
5/16" (8mm) DIA. (5 HOLES)
31"
787mm
25"
635mm
NOTE: A service stop (not included) must be installed at
the water inlet line.
NOTE: P-Trap (not supplied) to be installed per local
building code.
17 7/8"
454mm
178mm
5"
127mm
7"
C
L
178mm
11/16"
18mm
2 7/16"
63mm
114mm
10"
254mm
7"
2 1/2"
64mm
4 1/2"
3 1/2"
89mm
4 9/16"
116mm
F
13 7/8"
352mm
146mm
1 3/8"
35mm
E
7 1/4"
185mm
2 9/16"
65mm
5 3/4"
15"
381mm
3 3/16"
82mm
FINISHED FLOOR
33"
838mm
ORIFICE
HEIGHT
ELECTRICAL
Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.
3 9/16"
90mm
18 1/2"
471mm
2 5/8"
31 13/16"
808mm
RIM
HEIGHT
67mm
27"
686mm
ADA
REQUIREMENT
8"
203mm
159mm
6 1/4"
HANGER BRACKET
C
12 5/16"
313mm
1 1/2"
38mm
6 3/4"
172mm
18 7/8"
479mm
REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from
cabinet louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).
®
Page 2
Job Name: ____________________________________
Model: _____________________________ Qty. ______
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
Printed in the U.S.A.
Loading...