Halsey Taylor HTHB-HAC8BLWF User Manual
Satisfying Thirsts Since 1912
Model HTHB-HAC8BLWF and
HTHB-HACDBLWF
Filtered Bi-Level HAC Cooler with
Hydroboost® Bottle Filler
MODELS: HTHB-HAC8BLWF
GENERAL
Complete water station including HydroBoost® bottle lling station and HAC water cooler(s). Self-contained, wall-mounted bi-level water cooler. Model HTHBHAC8BLWF delivers chilled drinking water; model HTHB-HACDBLWF delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated,
two-stream Double Bubbler™ with non-removeable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series
stainless steel top, with satin nish resists stains. Anti-splash ridge reduces
splatter. Contoured to insure proper drainage.
HYDROBOOST® BOTTLE FILLING STATION
Sensor-activated enhanced with user interface graphics. Quick ll rate is
1.1 gallons per minute on refrigerated model and 1.5 gallons per minute on
non-refrigerated model. Laminar ow provides a clean ll with minimal splash
and easy maintenance. Equipped with an automatic 20-second shut-off timer.
SILVER ION ANTI-MICROBIAL PROTECTION
Key plastic components are integrated with silver ion
anti-microbial protection to inhibit growth of mold and mildew.
GREEN COUNTER™
Visually displays count of plastic bottles saved from landlls. (Based on 20 oz.
bottles for refrigerated models)
DOUBLE BUBBLER™
Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s integral
hood insures a satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to prevent tampering. Unit resists
corrosion and liming. A constant stream height is automatically maintained under
line pressures that vary from 20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or larger
before they enter the waterway.
WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/2” tube outlet for
1-1/2” slip joint connection. Trap and service stop not included.
RE FRIGE RATION SYST EM (Model HTHB-HAC8BLWF only)
Hermetically sealed, positive start compressor with lifetime lubrication
and built-in overload protection, efcient capillary sizing, large capacity
dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.
LEAD REDUCTION FILTER WITH FILTER LIFE INDICATOR
Equipped with the HWF3000 Watersentry® Plus Filter. Features
Quick-Disconnect, 1/4 turn installation and automatic inlet shut-off valve
that closes when lter is removed. High grade lter is made with
activated carbon and patented ATS lead-removal media.
Certied to NSF/ANSI 42 for Chlorine-Class 1, Particulate-Class 1 and
Taste and Odor and NSF/ANSI 53 for Lead Reduction. Filter is rated for
3,000 gallon capacity. Green, yellow and red LEDs visually indicate when
lter maintenance is required.
CAPACITIES CHART
HTHB-HACDBLWF
HAC Cooler with
Bottle Filler and Filter
*Rated for Indoor Use Only
Model
HTHB-HAC8BLWF and
HTHB-HACDBLWF
Cooler panels available in Platinum Vinyl or Stainless Steel.
(additional cost)
SUGGESTED SPECIFICATION
Unit shall include a bi-level water cooler with a bottle lling station. Model
HTHB-HAC8BLWF shall deliver 8 gph of 50°F drinking water at 90°F ambient air
and 80°F inlet water. Model HTHB-HACDBLWF shall deliver non-refrigerated
drinking water. Shall include WaterSentry® Plus 3000-gallon capacity lter,
certied to NSF/ANSI 42 for Chlorine-Class 1,Particulate-Class 1 and Taste
and Odor and NSF/ANSI 53 for lead reduction, with LED visual lter monitor to
indicate when lter maintenance is required. Shall provide 1.1-1.5 gpm with
laminar ow to minimize splashing. Shall include anti-microbial protected
plastic components to prevent mold and mildew. Cooler shall have stainless
steel basin with anti-splash ridge and removable drain strainer. Shall have
front and side pushbar activation with raised letters. Shall comply with
ADA guidelines for visual and motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.
Replacement Filters: Available as Singles and Multi-Packs.
Order part numbers:
• 55898C (single)
• 55898C_3PK (three pack)
• 55898C_12PK (twelve pack)
• 55898C_24PK (twenty-four pack)
• 55898C_48PK (forty-eight pack)
Model
No.
GPH Capacity Cooled to 50°F** Base
Ambient Air Temp
70°F 80°F 90°F
t
100°F
Rate
Cap.
F.L.
Amps
Shipping
Weight
lb.
Rated
Watt
Usage
HTHB-HAC8BLWF* 9.7 8.8 8.0 7.2 8.0 3.8 89 260
HTHB-HACDBLWF* - - - - - 1.0 85 120
NOTE: Continued product improvement makes specication sheets subject to change without notice.
* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F
t
UL 399 and ASHRAE (previously ARI 1010) compliant
halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523
SPEC00207 09/2014
Model HTHB-HAC8BLWF and
HTHB-HACDBLWF
Filtered Bi-Level HAC Cooler with
Hydroboost® Bottle Filler
OPERATING PRESSURES
Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure
adequate stream height. Use of water lter in
this situation is not recommended.
FRONT VIEW SIDE VIEW
58 9/16"
1488mm
MOUNTING HOLES
ACTIVATION
SENSOR
45 9/16"
1157mm
952mm
O
37 1/2"
7/16"
11mm
(6)
15"
381mm
5/16" (8mm) DIA.
6 1/2"
165mm
7 1/4"
185mm
20 3/8"
518mm
5 3/4"
146mm
(10 HOLES)
1 3/8"
35mm
E
F
2 9/16"
65mm
4 9/16"
116mm
5"
127mm
7"
178mm
17 7/8"
454mm
1 3/8"
35mm
C
L
254mm
FINISHED FLOOR
NOTE: A service stop (not included) must be installed at
the water inlet line.
NOTE: P-Trap (not supplied) to be installed per local
building code.
7"
178mm
18 1/16"
459mm
5 3/4"
146mm
11/16"
18mm
2 7/16"
63mm
10"
5 3/4"
146mm
1 3/8"
1 3/8"
35mm
35mm
C
L
B
6 1/4"
159mm
3 1/2"
89mm
4 1/2"
114mm
5 3/4"
146mm
13 7/8"
352mm
D
E
A
F
18 3/4"
476mm
20 1/8"
511mm
25 1/8"
638mm
39 1/2"
1003mm
ORIFICE HEIGHT
ORIFICE HEIGHT
ELECTRICAL
Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.
3 9/16"
90mm
18 5/8"
8"
203mm
472mm
HANGER BRACKET
C
4 1/8"
105mm
12 5/16"
313mm
6 3/4"
172mm
33"
838mm
2 5/8"
67mm
31 15/16"
811mm
RIM HEIGHT
27"
686mm
ADA
REQUIREMENT
18 7/8"
479mm
REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from
cabinet louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).
®
Page 2
Job Name: ____________________________________
Model: _____________________________ Qty. ______
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
Printed in the U.S.A.
Loading...