Halsey Taylor HTHB-HAC8BL User Manual

Satisfying Thirsts Since 1912

Model HTHB-HAC8BL and HTHB-HACDBL

Bi-Level HAC Cooler with

Hydroboost® Bottle Filler

MODELS:

HTHB-HAC8BL
HTHB-HACDBL

GENERAL

Complete water station including HydroBoost® bottle lling station and
HAC water cooler(s). Self-contained, wall-mounted bi-level water cooler.
Model HTHB-HAC8BL delivers chilled drinking water; model HTHB-HACDBL
delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated
two-stream Double Bubbler™ with non-removable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series

stainless steel cooler top, with satin nish resists stains. Anti-splash ridge

reduces splatter. Contoured to insure proper drainage.

HYDROBOOST® BOTTLE FILLING STATION

Sensor-activated enhanced with user interface graphics. Quick ll

rate is 1.1 gallons per minute on refrigerated model and 1.5 gallon

per minute on non-refrigerated model. Laminar ow provides a
clean ll with minimal splash and easy maintenance. Equipped with

an automatic 20-second shut-off timer.

SILVER ION ANTI-MICROBIAL PROTECTION

Key plastic components are integrated with silver ion anti-microbial
protection to inhibit growth of mold and mildew.

GREEN COUNTER™

Visually displays count of plastic bottles saved from landlls. (Based

on 20 oz. bottles for refrigerated models)

DOUBLE BUBBLER™

Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s
integral hood insures a satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to prevent tampering.
Unit resists corrosion and liming. A constant stream height is
automatically maintained under line pressures that vary from 20 to
105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps particles of 140 microns or larger
before they enter the waterway.

WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/2”
tube outlet for 1-1/2” slip joint connection. Trap and service stop not

included.

REFRIGERATION SYSTEM (Model HTHB-HAC8BL only)

Hermetically sealed, positive start compressor with lifetime lubrication and

built-in overload protection, efcient capillary sizing, large capacity

dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.

HAC Cooler with

Bottle Filler

*Rated for Indoor Use Only

Model
HTHB-HAC8BL and
HTHB-HACDBL

Cooler panels available in Platinum Vinyl or Stainless Steel.
(additional cost)

SUGGESTED SPECIFICATION

Unit shall include a bi-level water cooler with a bottle lling station. Model

HTHB-HAC8 shall deliver 8 gph of 50°F drinking water at 90°F ambient air
and 80°F inlet water. Model HTHB-HACD shall deliver non-refrigerated
drinking water. Lower units shall have mechanically activated pushbar
activation. Bottle Filler shall include electronic sensor for no-touch
activation with automatic 20-second shut-off timer. Shall include a
Green Counter™ displaying the count of plastic bottles saved from the

landll. Shall provide 1.1-1.5 gpm with laminar ow to minimize

splashing. Shall include anti-microbial protected plastic components to
prevent mold and mildew. Cooler shall have stainless steel basin with
anti-splash ridge and removable drain strainer. Shall have front and
side pushbar activation with raised letters. Shall comply with ADA
guidelines for visual and motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.

CAPACITIES CHART

Model
No.

HTHB-HAC8BL* 9.7 8.8 8.0 7.2 8.0 3.8 89 260

HTHB-HACDBL* - - - - - 1.0 85 120

NOTE: Continued product improvement makes specication sheets subject to change without notice.

* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F

t

UL 399 and ASHRAE (previously ARI 1010) compliant

GPH Capacity Cooled to 50°F** Base

Ambient Air Temp

70°F 80°F 90°F

HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523

t

100°F

halseytaylor.com

Rate
Cap.

F.L.

Amps

Shipping

Weight

lb.

Rated

Usage

SPEC00206 09/2014

Watt

Model HTHB-HAC8BL and HTHB-HACDBL
Bi-Level HAC Cooler with
Hydroboost® Bottle Filler

1/4” O.D. TUBE

WATER INLET

TO COOLER

OPERATION OF QUICK CONNECT FITTINGS

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE TO ATTACH

A B C

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

TUBE IS SECURED

TUBE IS SECURED

IN POSITION

IN POSITION

B CA

BUILDING WATER

SERVICE STOP

(NOT FURNISHED)

PUSH IN COLLET

PUSH IN COLLET

TO RELEASE TUBE

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

PULLING IT OUT HELPS TO

RELEASE TUBE

RELEASE TUBE

FRONT VIEW SIDE VIEW

7/16"

O

11mm

58 9/16"
1488mm

MOUNTING HOLES

ACTIVATION
SENSOR

45 9/16"
1157mm

952mm

37 1/2"

(6)

15"

381mm

5/16" (8mm) DIA.

6 1/2"

165mm

7 1/4"

185mm

20 3/8"
518mm

5 3/4"

146mm

(10 HOLES)

1 3/8"

35mm

E

F

2 9/16"
65mm

4 9/16"
116mm

5"

127mm

7"

178mm

INLET

17 7/8"

454mm

7"

178mm

1 3/8"

35mm

C

L

11/16"
18mm

2 7/16"
63mm

10"

254mm

FINISHED FLOOR

NOTE: A service stop (not included) must be installed at
the water inlet line.

NOTE: P-Trap (not supplied) to be installed per local
building code.

18 1/16"

459mm

5 3/4"

146mm

5 3/4"

146mm

1 3/8"

35mm

35mm

C

L

B

6 1/4"

159mm

1 3/8"

3 1/2"

89mm

4 1/2"

114mm

5 3/4"

146mm

13 7/8"

352mm

D

E

A

F

18 3/4"

476mm

20 1/8"
511mm

25 1/8"

638mm

39 1/2"

1003mm

ORIFICE HEIGHT

ORIFICE HEIGHT

ELECTRICAL

Hydroboos® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.

OPERATING PRESSURES

Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure

adequate stream height. Use of water lter in

this situation is not recommended.

3 9/16"
90mm

18 5/8"

8"

203mm

472mm

HANGER BRACKET

C

4 1/8"

105mm

12 5/16"
313mm

6 3/4"

172mm

33"

838mm

2 5/8"
67mm

31 15/16"

811mm

RIM HEIGHT

27"

686mm

ADA

REQUIREMENT

18 7/8"

479mm

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from
cabinet louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

®

Page 2

Job Name: ____________________________________

Model: _____________________________ Qty. ______

Contact: ______________________________________

Approval Signature: _____________________________

Notes:

Printed in the U.S.A.