Halsey Taylor HTHB-HAC8 User Manual

Satisfying Thirsts Since 1912

Model HTHB-HAC8 and HTHB-HACD

Single HAC Cooler with

Hydroboost® Bottle Filler

MODELS:

HTHB-HAC8
HTHB-HACD

GENERAL

Complete water station including HydroBoost® bottle lling station and
HAC water cooler. Self-contained, wall-mounted water cooler. Model
HTHB-HAC8 delivers chilled drinking water; model HTHB-HACD delivers
non-refrigerated drinking water. Exclusive one-piece, chrome-plated
two-stream Double Bubbler™ with non-removable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series

stainless steel cooler top, with satin nish resists stains. Anti-splash ridge

reduces splatter. Contoured to insure proper drainage.

HYDROBOOST® BOTTLE FILLING STATION

Sensor-activated enhanced with user interface graphics. Quick ll

rate is 1.1 gallons per minute on refrigerated model and 1.5 gallon

per minute on non-refrigerated model. Laminar ow provides a
clean ll with minimal splash and easy maintenance. Equipped with

an automatic 20-second shut-off timer.

SILVER ION ANTI-MICROBIAL PROTECTION

Key plastic components are integrated with silver ion anti-microbial
protection to inhibit growth of mold and mildew.

GREEN COUNTER™

Visually displays count of plastic bottles saved from landlls. (Based

on 20 oz. bottles for refrigerated models)

DOUBLE BUBBLER™

Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s
integral hood insures a satisfying drink of water.

PUSH BAR ACTUATION MECHANISM

Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to prevent tampering.
Unit resists corrosion and liming. A constant stream height is
automatically maintained under line pressures that vary from 20 to
105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps particles of 140 microns or larger
before they enter the waterway.

WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/4”
tube outlet for 1-1/4” slip joint connection. Trap and service stop not

included.

REFRIGERATION SYSTEM (Model HTHB-HAC8 only)

Hermetically sealed, positive start compressor with lifetime lubrication and

built-in overload protection, efcient capillary sizing, large capacity

dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.

HAC Cooler with

Bottle Filler

*Rated for Indoor Use Only

Models
HTHB-HAC8 and
HTHB-HACD

Cooler panels available in Platinum Vinyl or Stainless Steel.

(additional cost)

SUGGESTED SPECIFICATION

Unit shall include a single water cooler with a bottle lling station. Model

HTHB-HAC8 shall deliver 8 gph of 50°F drinking water at 90°F ambient air
and 80°F inlet water. Model HTHB-HACD shall deliver non-refrigerated
drinking water. Lower Unit shall have mechanically activated pushbar
activation. Bottle Filler shall include electronic sensor for no-touch
activation with automatic 20-second shut-off timer. Shall include a
Green Counter™ displaying the count of plastic bottles saved from the

landll. Shall provide 1.1-1.5 gpm with laminar ow to minimize

splashing. Shall include anti-microbial protected plastic components to
prevent mold and mildew. Cooler shall have stainless steel basin with
anti-splash ridge and removable drain strainer. Shall have front and
side pushbar activation with raised letters. Shall comply with ADA
guidelines for visual and motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.

CAPACITIES CHART

Model
No.

HTHB-HAC8* 9.7 8.8 8.0 7.2 8.0 3.8 89 260

HTHB-HACD* - - - - - 1.0 85 120

NOTE: Continued product improvement makes specication sheets subject to change without notice.

* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F

t

UL 399 and ASHRAE (previously ARI 1010) compliant

GPH Capacity Cooled to 50°F** Base

Ambient Air Temp

70°F 80°F 90°F

HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523

t

100°F

halseytaylor.com

Rate
Cap.

F.L.

Amps

Shipping

Weight

lb.

SPEC00205 09/2014

Rated

Watt

Usage

Model HTHB-HAC8 and HTHB-HACD
Single HAC Cooler with
Hydroboost® Bottle Filler

1/4” O.D. TUBE

WATER INLET

TO COOLER

OPERATION OF QUICK CONNECT FITTINGS

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE TO ATTACH

A B C

52 1/16"

1323mm

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

TUBE IS SECURED

TUBE IS SECURED

IN POSITION

IN POSITION

B CA

ACTIVATION
SENSOR

5/16" (8mm) DIA. (5 HOLES)

39 1/16"
991mm

31"

787mm

635mm

SERVICE STOP

(NOT FURNISHED)

PUSHING TUBE IN BEFORE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

PULLING IT OUT HELPS TO

7/16"

O

11mm

MOUNTING HOLES

(6)

25"

21 3/8"

543mm

BUILDING WATER

PUSH IN COLLET

PUSH IN COLLET

TO RELEASE TUBE

TO RELEASE TUBE

RELEASE TUBE

RELEASE TUBE

5 3/4"

146mm

1 3/8"

35mm

E

18 3/8"

467mm

INLET

NOTE: A service stop (not included) must be installed at
the water inlet line.

NOTE: P-Trap (not supplied) to be installed per local
building code.

Hydroboost® station equipped with electric cord
and three-prong molded rubber plug for use with
15-amp minimum receptacle. Rated at 115 volt,
60 Hz, single phase.

OPERATING PRESSURES

Supply water - 105 psi maximum
Minimum 40 psi supply line pressure required
in special circumstances where both sides of
bi-level are in use simultaneously to ensure

adequate stream height. Use of water lter in

this situation is not recommended.

FRONT VIEW SIDE VIEW

17 7/8"

ELECTRICAL

454mm

7"

178mm

B

D

A

5"

127mm

C

L

178mm

11/16"

18mm

2 7/16"
63mm

114mm

10"

254mm

7"

2 1/2"

64mm

4 1/2"

3 1/2"

89mm

4 9/16"
116mm

F

13 7/8"

352mm

1 3/8"

35mm

E

185mm

2 9/16"
65mm

5 3/4"

146mm

7 1/4"

15"

381mm

3 3/16"
82mm

FINISHED FLOOR

33"

838mm

ORIFICE
HEIGHT

31 13/16"

808mm

RIM

HEIGHT

2 5/8"

67mm

27"

686mm

ADA

REQUIREMENT

8"

203mm

159mm

6 1/4"

3 9/16"
90mm

18 1/2"

471mm

HANGER BRACKET

C

12 5/16"
313mm

1 1/2"

38mm

172mm

6 3/4"

18 7/8"

479mm

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:

A = Recommended Water Supply Location. Shut-off valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.

B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.

Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from

cabinet louvers to wall.

F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

®

Page 2

Job Name: ____________________________________

Model: _____________________________ Qty. ______

Contact: ______________________________________

Approval Signature: _____________________________

Notes:

Printed in the U.S.A.