Halsey Taylor HTE FR User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Face-mounted fountain, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contour­formed basin with rounded corners and edges
reduces splatter, insures proper drainage and
prevents standing waste water. Designed to be
easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for
installation in public areas. Model meets state
and federal requirements as defined by the
Americans with Disabilities Act.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

WATER INLET

3/8" O.D. Tubing

DRAIN OUTLET

1-1/4" waste outlet located in freeze-resistant
valve system.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front,
contour-formed basin to eliminate splashing and
standing water, and shall have rounded corners
and edges. Projector shall be two-stream,
mound-building type with integral hood guard and
anti-squirt feature. Fountain shall comply with
ANSI 117:1 and ADA for visual and motion
disabilities. The manufacturer shall certify the unit
to meet the requirements of NSF/ANSI 61, and
the Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Stainless Steel

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

Each HTEFR consists of 2 cartons
of the following:

Fountain and Misc. Parts
Freeze-Resistant Valve System

Service stop not included.

Copper tube to water supply connection not
furnished

Shipping weight: 36 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B14 / 1-2005

MODEL: ■■HTE FR

Barrier-Free Fountain

Freeze-Resistant

Classic

™

Series

www.halseytaylor.com

Halsey Taylor Barrier-Free Drinking
Fountains and Water Coolers conform
to The Americans with Disabilities Act
and American National Standards
Institute Specifications.

Printed in the U.S.A.

Classic™Series
Freeze-Resistant
Barrier-Free Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of
freeze-resistant system and plumbing.
For wall support required locations see
installation instructions provided with fountain.
Bolt fountain securely to wall per installation
instructions. Water supply and water line are to
be assembled as required. Final check for leaks
and correct functions of fountain should be
made. (See installation instructions for full details.)

Freeze resistant box must be installed on
interior non-freezing wall.

CAUTION – Fountain must be securely

bolted to wall.

OPERATING PRESSURES:

Supply water - 105 psi maximum

FRONT VIEW / WALL LAYOUT

SIDE VIEW

LEGEND:
A = 7/8" DIA. (22mm) HOLE FOR WATER INLET
B = 1-3/4" DIA. (44mm) HOLE FOR WASTE LINE

(ELBOW AND TRAP PROVIDED)

NOTE: A service supply stop (not included) must be

installed at the fountain inlet line.

*ADA Requirement