Halsey Taylor HRFS FR User Manual

These fountains are certified to

NSF/ANSI 61.

GENERAL

Face-mounted fountain, one-piece, non­corrosive stainless steel number 300 series
with brushed satin finish. Contour-formed
basin with rounded corners and edges reduces
splatter, insures proper drainage and prevents
standing waste water.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.

BUBBLER

Vandal-resistant bubbler is one-piece,
chrome-plated, and is secured to fountain with
anti-rotation mounting system. Unit has inte­gral hood guard design to prevent
contamination from other users, airborne
deposits and
tampering.

PUSHBUTTON ACTUATION MECHANISM

Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

WATER INLET

3/8" O.D. Tubing into freeze-resistant box

DRAIN OUTLET

1-1/4" waste outlet located in freeze-resistant
valve system.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front,
contour-formed basin to eliminate splashing and
standing water, and shall have rounded corners
and edges. Projector shall be chrome-plated
vandal-resistant type with integral hood guard
and anti-squirt feature. The manufacturer shall
certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current spec
sheet.

Standard finish is Stainless Steel

Each HRFS FR consists of 2 cartons of the
following:

Fountain, Panel and Misc. Parts

Freeze-Resistant Valve System

Service stop not included.

Shipping weight: 35 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D9 / 8-2007

MODEL HRFS FR

Face-Mounted Fountain

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Freeze-Resistant

Contour

™

Series

Printed in the U.S.A.

HRFS FR

Freeze-Resistant
Contour™Face-Mounted
Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS

Refer to diagrams for rough-in of freeze-resistant
system and plumbing. For wall support required
locations see installation instructions provided
with fountain. Water supply and waste line are to
be assembled as required. Final check for leaks
and correct functions of fountain should be made.
(For details see the installation instructions.)

CAUTION – Fountain must be securely

bolted to wall.

OPERATING PRESSURES

Supply water-105 psi maximum

WALL LAYOUT

NOTE:

A service supply stop must be installed at the fountain inlet line.

Important: Freeze-resistant box must be installed on interior non-freezing wall.

TOP VIEW

FRONT VIEW

SIDE VIEW

LEGEND:

A = MOUNTING BOLT LOCATIONS
(4) 3/8" DIA. NOT PROVIDED)

B = 7/8" DIA. (22mm) HOLE FOR WATER
SUPPLY TUBE

C = 7/8" DIA. (22mm) HOLE FOR
OPERATING CABLE

D = 1-3/4" (44mm) HOLE FOR WASTE
LINE

1-1/4" WASTE TUBE FOR 1-1/4" TRAP
INCLUDED.