Halsey Taylor HRFSBP-FR User Manual
This fountain is Classified by
Underwriters Laboratories, Inc.
in accordance with ANSI/NSF 61,
Section 9 - 1997b.
GENERAL
Face-mounted fountain, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contourformed basin with softly rounded corners and
edges reduces splatter, insures proper
drainage and prevents standing waste water.
FREEZE-RESISTANT VALVE SYSTEM
Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.
BUBBLER
Vandal-resistant bubbler is one-piece,
chrome-plated, and is secured to fountain with
anti-rotation mounting system. Unit has integral
hood guard design to prevent contamination
from other users, airborne deposits and tampering.
PUSHBUTTON ACTUATION MECHANISM
Self closing, vandal-resistant pushbutton does
not require grasping or twisting.
PANEL
Constructed of stainless steel, number 300
series with satin finish.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns o r l a r g e r b e f o r e t h e y
enter the waterway.
WATER INLET
3/8˝ O.D. Tubing into freeze-resistant box.
DRAIN OUTLET
1-1/4˝ waste outlet located in freeze-resistant
valve system.
SUGGESTED SPECIFICATIONS
Fountain shall include pushbutton on the front,
contour-formed basin to eliminate splashing and
standing water, and shall have rounded corners
and edges. Projector shall be chrome plated
vandal-resistant type with integral hood guard
and anti-squirt feature. The manufacturer shall
certify the unit to meet the requirements of
ANSI/NSF 61, Section 9 and the Safe Drinking
Water Act.
Note: Continued product improvement makes
specifications subject to change without notice.
Standard finish is Stainless Steel
Optional Accessories (extra cost)
■■
Cane Apron
Each HRFSBPFR consists of 2 cartons of the
following:
Fountain, Panel and Misc. Parts
Freeze-Resistant Valve System
Service stop not furnished.
Shipping weight: 50 lbs.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
D12 / 9-2002
MODEL:■■HRFSBPFR
Fountain With Back Panel
Contour
™
Face-Mounted
Freeze-Resistant
www.halseytaylor.com
Printed in the U.S.A.
Freeze-Resistant
Contour™Face-Mounted
Fountain With Back Panel
(CONTINUED)
MOUNTING INSTRUCTIONS
Refer to diagrams for rough-in of freeze-resistant
system and plumbing. Mount wall plate assembly
to wall per the installation instructions. Hang
fountain panel over the wall plate assembly.
Attach fountain to wall plate assembly. Water
service line and waste line are to be assembled
as required. Final check for leaks and correct
functions of fountain should be made. (For details
see the installation instructions.)
CAUTION — Fountain must be securely
bolted to wall.
OPERATING PRESSURES
Supply water-105 psi maximum
NOTE: A service supply stop must be installed
at the fountain inlet line.
SIDE VIEW
TOP VIEW FRONT VIEW
WALL LAYOUT
Important: For wall support required locations see installation instructions provided with panel and fountain.
Loading...