Halsey Taylor HRFESBP User Manual
This fountain is certified to
NSF/ANSI 61.
GENERAL
Two face-mounted fountains, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contourformed basins with softly rounded corners and
edges reduces splatter, insures proper
drainage and prevents standing waste water.
Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
PUSHBUTTON ACTUATION MECHANISM
Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.
PANEL
Constructed of stainless steel, No. 300 series
with satin finish.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
WATER INLET
3/8" O.D. Tubing
DRAIN OUTLET
1-1/4" tube outlet for 1-1/4" slip joint connection.
SUGGESTED SPECIFICATIONS
Both fountains shall include pushbutton on the
front. Both shall include contour-formed basins
to eliminate splashing and standing water, and
shall have rounded corners and edges. Each
projector shall be two-stream, mound-building
type with integral hood guard and anti-squirt
feature. Fountain shall comply with ANSI 117:1
and ADA for visual and motion disabilities.
The manufacturer shall certify the unit to meet
the requirements of NSF/ANSI 61, and the
Safe Drinking Water Act.
Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.
Standard Finish is Stainless Steel
Optional Finishes (extra cost)
■■
Galaxy Gray Marblyte
™
■■
Black Onyx Marblyte
™
Optional Accessories (extra cost)
■■
Cane Touch Apron
■■
Vandal-Resistant Kit
■■
Easy-Flex™Bubbler
■■
Water Filter (2 recommended)
Each HRFESBP consists of 1 carton
as follows:
Fountain, Panel and Misc. Parts
Service stop not included.
Shipping weight: 53 lbs.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
B13 / 8-2007
MODEL HRFESBP
Barrier-Free Fountain
Contour™Bi-Level
halseytaylor.com
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
HRFESBP
Contour
™
Barrier-Free
Bi-Level Fountain
(CONTINUED)
MOUNTING INSTRUCTIONS
Refer to diagrams for rough-in of
plumbing. Mount wall plate assembly
to wall per the installation instructions.
Hang fountain panel over the wall
plate assembly. Attach fountains to
wall plate assembly. Water service line
and waste line are to be assembled as
required. Final check for leaks and
correct functions of fountain should be
made. (For details see the installation
instructions.)
CAUTION — Fountain must be
securely bolted to wall.
OPERATING PRESSURES:
Supply water - 105 psi maximum
NOTE: A service stop (not included)
must be installed at the
fountain inlet line.
NOTE: For wall support required
locations see installation
instructions provided with
panel and fountains.
D
*
*
6 5/8"
168mm
12 1/8"
308mm
3 13/16"
97mm
38 1/2"
978mm
5/8"
16mm
2 1/4"
57mm
2 1/4"
57mm
13"
330mm
18 3/4"
476mm
33"
838mm
27"
686mm
6 1/2"
165mm
ADA REQUIREMENT
BACK PANEL
3/8" DIA (20)
10 mm
C
A
STUDS REQUIRED
FOR FRAME WALL
CONSTRUCTION
E
WALL PLATE
ASSEMBLY
A
B
LEGEND:
A = RECOMMENDED WATER SUPPLY LOCATION, 3/8 O.D. UNPLATED COPPER TUBE
CONNECT STUBBED 1-1/2" (38mm) FROM WALL. SHUT OFF VALVE BY OTHERS.
B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN
STUBBED 6-5/8" (168mm) FROM THE WALL.
C = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN
STUBBED 1-3/8" (35mm) FROM THE WALL.
D = 1-1/4" TRAP FURNISHED
E = 1/4" (6mm) DIA. HOLES FOR MOUNTING PLATE TO WALL.
7 1/4"
184mm
6"
152mm
5 1/4"
133mm
5 1/4"
133mm
8"
203mm8"203mm
5 1/4"
133mm
5 1/4"
133mm
16"
406mm
8"
203mm8"203mm
16"
406mm
3"
76mm
18 3/4"
476mm
2 3/4"
70mm
3"
76mm
1 1/2"
38mm
1 1/2"
38mm
7 1/4"
184mm
43 5/8"
1108mm
26 13/16"
681mm
31 1/4"
794mm
*
WALL LAYOUT
SIDE VIEW
FRONT VIEW
Loading...