Halsey Taylor HRFEREE-Q User Manual

This water cooler is certified to

NSF/ANSI 61.

GENERAL

Modular, electric refrigerated, wall-mounted
water cooler designed to be easily accessible
to physically challenged individuals. When
properly installed, unit meets state and federal
requirements as defined by the Americans with
Disabilities Act. Unit is certified to NSF/ANSI
61 and meets requirements of the Safe
Drinking Water Act. Unit provides 50° F water
at 80° F inlet water and 90° F ambient.

FOUNTAIN

Face-mounted, one-piece, non-corrosive
stainless steel cooler top, number 300 series
with satin finish, contour-formed basin with softly
rounded corners.

BUBBLER

Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

AUTOMATIC ACTUATION

Model HRFEREE-Q features infra-red light
beam emitting sensor and a solenoid valve.
Upon interruption of the light beam, the sensor
actuates the solenoid valve to flow water. User
does not have to touch the water cooler to
obtain a drink of water. Supplied with a built-in
time delay to avoid nuisance actuation from
passers-by.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.

MOUNTING FRAME

Mounting frame is manufactured of corrosion
resistant, galvanized steel. Open construction
designed for ease of installation. Mounting
frame can be shipped in advance for rough-in
installation.

PANELS

Constructed of stainless steel, number 300
series with satin finish. Removable lower panel
provides access to plumbing and refrigeration
system. Panels overlap wall opening

1

/

2"

.

SUGGESTED SPECIFICATIONS

Shall deliver 7.5 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Fountain shall
include infra-red sensor, contour-formed basin
to eliminate splashing and standing water, and
rounded corners and edges. Bubbler shall be
chrome plated, two-stream, mound- building
type. Cooling unit shall have a high efficiency
positive start compressor using R134A, with
pressurized counterflow cooling evaporator/chiller.
Cooler shall comply with ANSI 117:1 and ADA
for visual and motion disabilities. The manufacturer
shall certify the unit to meet the requirements
of NSF/ANSI 61, and the Safe Drinking Water
Act. Unit complies with ARI Standard 1010.

NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.

NOTE: Water will only flow from bubbler
when unit has electrical connection.

Standard finish is Stainless Steel

Optional Accessories (extra cost)

■■

Vandal-Resistant Kit

■■

Water Filter

■■

Easy-Flex™Bubbler

Each HRFEREE-Q consists of 3 cartons
as follows:

Mounting Frame

Cooling Unit-SJ8-Q

Fountain, Panels & Misc. Parts

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

A26 / 8-2007

MODEL HRFEREE-Q

Barrier-Free Cooler

Electronic Eye

Contour

™

Series

halseytaylor.com

HRF BARRIER-FREE SERIES

Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt

Ambient Air Temp

Cap. lb. Usage

70°F 80°F 90°F†100°F

HRFEREE-Q 9.3 8.3 7.5 6.8 7.5 4.0 96 370

* With projector service and tap water at 80° F

For additional specification of the cooling unit, see specification sheet for Model SJ8 Remote in this catalog.

†

UL listed and complies with ARI Standard 1010

Service stop not included

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

HRFEREE-Q

Contour™Electronic Eye
Barrier-Free Cooler

(CONTINUED)

WALL OPENING

IMPORTANT: It is necessary to create a wall
opening 18

3

/4

" W x 37

3

/4

" H and 4

1

/

2" above the

floor line.

MOUNTING INSTRUCTIONS

Refer to rough-in for location of plumbing and
electrical sources. The support frame is to be
installed first. The shelf for the water chiller
should be assembled to the wall frame, and
then place chiller into position. Hang upper
fountain panel to hanger on frame. Fountain is
to be attached to panel and wall frame. Water
service line, waste line and electrical is
assembled as required. The bottom panel
is attached last, after a final check for leaks
and correct functions of fountains and chiller.
(For details see the installation instructions.)

OPERATING PRESSURES:

Supply water - 105 psi maximum

ELECTRICAL DATA

Junction box for a (3) wire 10 AMP branch
circuit. Standard 120 volt, 60 HZ, single phase.

FRONT VIEW

TOP & SIDE VIEW