Halsey Taylor HRFE User Manual
This fountain is certified to
NSF/ANSI 61.
GENERAL
Face-mounted fountain, one-piece,
non-corrosive stainless steel number 300
series with brushed satin finish. Contourformed basin with softly rounded corners and
edges reduces splatter, insures proper
drainage and prevents standing waste water.
Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
PUSHBUTTON ACTUATION MECHANISM
Self-closing, vandal-resistant pushbutton does
not require grasping or twisting.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
WATER INLET
3/8" O.D. Tubing
DRAIN OUTLET
1-1/4" tube outlet for 1-1/4" slip joint connection.
SUGGESTED SPECIFICATIONS
Fountain shall include pushbutton on the front,
contour-formed basin to eliminate splashing and
standing water, and shall have rounded corners
and edges. Projector shall be two-stream,
mound-building type with integral hood guard
and anti-squirt feature. Fountain shall comply
with ANSI 117:1 and ADA for visual and motion
disabilities. The manufacturer shall certify the
unit to meet the requirements of NSF/ANSI 61,
and the Safe Drinking Water Act.
Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.
Standard Finish is Stainless Steel
Optional Finishes (extra cost)
■■
Galaxy Gray Marblyte
™
■■
Black Onyx Marblyte
™
Optional Accessories (extra cost)
■■
Vandal-Resistant Kit
■■
Easy-Flex™Bubbler
■■
Water Filter
Each HRFE consists of 1 carton
of the following:
Fountain and Misc. Parts
Service stop not included.
Shipping weight: 15 lbs.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
B8 / 8-2007
MODEL HRFE
Barrier-Free Fountain
Contour™Series
halseytaylor.com
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
HRFE
Contour™Barrier-Free
Fountain
(CONTINUED)
MOUNTING INSTRUCTIONS
Refer to diagrams for rough-in of plumbing.
For wall support required locations see
installation instructions provided with fountain.
Water service line and waste line are to be
assembled as required. Final check for leaks
and correct functions of fountain should be
made. (For details see the installation
instructions.)
CAUTION — Fountain must be securely
bolted to wall.
OPERATING PRESSURES:
Supply water - 105 psi maximum
SIDE VIEWFRONT VIEW
Note: A service supply stop (not included) must be installed at the fountain inlet line.
1-1/4" Trap provided.
WALL LAYOUT
TOP VIEW
*ADA Requirement
Loading...