Halsey Taylor HOF14-Q FR User Manual

These water coolers are certified to

NSF/ANSI 61.

GENERAL

Self-contained, electric refrigerated,
free-standing water cooler designed to be
easily accessible to able-bodied individuals.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.

CABINET

Stainless steel panels resist wear and corrosion.
Durable Satin Finish helps hide water spots
and fingerprints.

COOLER TOP

Non-corrosive stainless steel cooler top, number
300 series with satin finish resists stains and
corrosion and is easy to maintain. Anti-splash
ridge reduces splatter. Contoured to insure
proper drainage.

BUBBLER

Vandal-resistant projector is one-piece, chrome­plated. Unit has integral hood guard design to
prevent contamination from other users, airborne
deposits and tampering.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

INLET STRAINER

Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.

TEMPERATURE CONTROL

Positive sensing thermostat for controlling
temperature of storage tank water. Factory set
at 50° F Adjustable ± 5° F.

STORAGE TANK

Non-pressurized stainless steel
evaporator/storage tank for long life.
Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the
Safe Drinking Water Act.

REFRIGERATION SYSTEM

Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.

VENTILATION

Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.

SUGGESTED SPECIFICATIONS

Shall deliver 13.5 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Shall have
stainless steel basin with removable drain
strainer. Bubbler shall be vandal-resistant type.
Separate valve and automatic stream regulator
shall be mounted within cabinet. Refrigeration
system shall employ high efficiency, positive
start compressor using R134A, non-pressurized
tank with totally encapsulated insulation and
be controlled by positive sensing thermostat.
The manufacturer shall certify the unit to meet
the requirements of NSF/ANSI 61, and the
Safe Drinking Water Act. Unit complies with
ARI Standard 1010.

NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.

Stainless Steel Finish Only

Optional Accessories (extra cost)

■■

Heating Element for Frost-Resistant Option
(Factory installed- Model HOF14-Q-FR)

■■

Water Filter (not recommended for use with
FR models)

■■

220-240V 60HZ

Trap and service stop not included.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

C17 / 8-2007

MODEL:

■■

HOF14A-Q ■■HOF14-Q FR

HOF14-Q OUTDOOR COOLER

Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt

Ambient Air Temp

Cap. lb. Usage

70°F 80°F 90°F†100°F

HOF14A-Q 16.3 14.9 13.5 12.2 13.5 7.5 90 690
HOF14A-Q FR 16.3 14.9 13.5 12.2 13.5 9.7 90 940
HOF14A-Q 220-240V 60HZ 16.3 14.9 13.5 12.2 13.5 3.75 90 690
HOF14A-Q FR 220-240V 60HZ 16.3 14.9 13.5 12.2 13.5 4.9 90 940

* With projector service and tap water at 80° F

†

UL listed and complies with ARI Standard 1010

Free-Standing Cooler

Outdoor

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

HOF14A-Q, HOF14-Q FR

Free-Standing Outdoor
Cooler

(CONTINUED)

PLUMBING CONNECTIONS

Waste and supply lines through back of cabinet.
Waste 1

1

/4" IPS. Supply 3/8" copper.

Trap and service stop not included.

OPERATING PRESSURES:

Supply water - 105 psi maximum

ELECTRICAL

Standard 120 volt, 60 Hz, single phase.
Requires

1

/2" IPS rigid conduit into junction box

inside cabinet (hole provided).

FRONT VIEW SIDE VIEW