Halsey Taylor HDF User Manual

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
E18 / 8-2007
HDF Cane Touch Apron for Heavy-Duty Drinking Fountain
Cane Touch Apron
halseytaylor.com
HDF Cane Apron shown installed on
Halsey Taylor Model HDFBLEBP
The cane touch apron is an optional accessory designed to bring the bottom of bi-level units into line with each other to give a sense of symmetry and to satisfy customer preference. For use on Halsey Taylor Heavy-Duty Contour™series units. When installed properly all HDF Units meet ADA requirements without the cane apron. Standard finish is 14 gauge heavy-duty stainless steel. Overall Dimensions: 11
15
/16
" W x 6" H x 18" D.
Note: Floor to underside measurements of cane apron equals 27" when mounted correctly. 24" (610mm) for child ADA.
KIT CONSISTS OF:
14 gauge stainless steel cane apron
14 gauge stainless steel bottom cover plate
Vandal-resistant screws
Installation instructions
Use part #HDFCANE when ordering.
NOTE: Continued product improvement makes specifications subject to change without notice. See Halsey Taylor website for most current spec sheet.
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
(CONTINUED)
INSTALLATION INSTRUCTIONS FOR HEAVY DUTY CANE APRON KIT
INSTALLATION PROCEDURE:
1) Remove screws and bottom cover plate from fountain. Discard bottom cover plate.
2) Attach item 1 (Cane Apron Assy.) to bottom of fountain with six screws previously removed.
3) Attach new bottom cover plate (Item 2) to cane apron assy. with supplied screws (Item 3).
HDF Cane Touch Apron for Heavy Duty Drinking Fountain
PARTS LIST
NS
PART NO.ITEM NO.
1 2 3
28566C 28556C 75570C 75520C
DESCRIPTION
Cane Apron Assy. Bottom Cover Screw - #10 x .50 Pinned Torx Bit - Pinned Torx T-25
6 - Screws
(Supplied with
fountain)
1
2
3
(7 - Screws
To ta l )
Loading...