Halsey Taylor HCRFERQ-A Installation Manual

HCRFERQ - A

Halsey Taylor Owners Manual

Refrigerated Fountain with Back Panel

HCRF - ER

Installer

To assure you install this model easily and correctly,
PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE
INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH
PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leave
these instructions inside the fountain for future reference.

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON

IMPORTANT! INSTALLER PLEASE NOTE.

THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO
WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY
OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK
INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN
INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING
THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER
SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDING
PLUMBING SYSTEM.

1/4" O.D. TUBE
WATER INLET
TO COOLER

3/8" O.D. UNPLATED
COPPER TUBE CONNECT
COLD WATER SUPPLY

BUILDING WAT ER INLET

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN
TUBE TO ATTACH

TUBE IS

SECURED

IN POSITION

PUSH IN COLLET

TO RELEASE TUBE

FIG. 1

NOTE: WATER FLOW

DIRECTION

SERVICE STOP
(NOT FURNISHED)

FIG. 2

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

97806C (Rev. A - 04/02)

HCRFERQ - A

HCRF-ER ROUGH-IN

LEGEND:
A = 3/8" O.D. TUBE WATER OUTLET
B = 3/8" O.D. TUBE WATER INLET
C = 1-1/4" O.D. WASTE TUBE (INCLUDED)
D = ELECTRICAL INLET

97806C (Rev. A - 04/02)

FIG. 3

PAGE 2