Halsey Taylor Direct Bury Adaptor User Manual

GENERAL

Makes rough-in and installation easier for all
models of non-freeze resistant Endura II™tubular
fountains. Opening in adaptor allows for
simplified routing of water supply and drain into
the fountain body. 3/4" rods provide added
stability. Steel adaptor features textured powder­coat finish, and E-coat immersion which coats
the outside and inside of the adaptor for the
ultimate in corrosion protection.

KIT CONSISTS OF:

■

Adapter Panel

■

(3) 3/4" Rods

■

Assorted hardware (nuts, bolts and washers)
needed for installation

■

Installation instructions

Shipping Weight: 40 lbs.

Use part #97890C when ordering

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

E25 / 8-2007

Direct Bury Fountain Adaptor
for 4400 Series Tubular Fountains

Fountain Adaptor Kit

Direct Bury

halseytaylor.com

INSTALLATION INSTRUCTIONS

1. Thread Nuts (Item 3) onto Rods (Item 2) (one Nut per Rod).

2. Thread Rods into Adapter Cylinder (Item 1) and tighten Nuts against
Cylinder Securely.

3. Place Washers (Item 6) on Bolts (Item 4) (one Washer per Bolt.)
Assemble Bolts into Adapter Flange. Thread Bolts all the way in.

4. Secure Adapter into Concrete Forms as per Standard Practice and
as Shown Below. Be sure to Align Adapter for proper location of
Water Inlet Line, Drain Line, and required Fountain Alignment.

5. After Sufficient Cure of Concrete, remove Flange Bolts and Washers.

6. Mount Fountain Assembly per Instructions Supplied with Fountain
and Items 4, 5 & 6.

PARTS LIST

ITEM NO. PART NO. DESCRIPTION

1 45835C Adapter - Direct Bury Fountain
2 75618C Rod - 3/4" Dia.
3 75616C Nut - 3/4" 10UNC-2B Hex.
4 70204C Bolt - 3/8" 16UNC-2A Hex. Hd.
5 75611C Washer - 3/8" Lock
6 70421C Washer - 3/8" Plain

NOTE: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current spec sheet.

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE: