Halsey Taylor Access Panel Kit User Manual

GENERAL

This kit can be used on Halsey Taylor wall
mounted units and units with traps behind the
wall, to provide access to plumbing connections.
Available in stainless steel finish only.

KIT CONSISTS OF:

■

Stainless steel panel

■

Mounting bracket

■

Assorted hardware (screws, nuts, bolts)
needed for installation

■

Installation instructions

Use APHT when ordering

NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

E16 / 7-2006

Access Panel Kit

Access Panel Kit

halseytaylor.com

OPTIONAL ACCESS PANEL (APHT)

1. Position clips (4) on frame’s flanges (flat side of
clips to be toward front).

2. Place access panel frame into 8" x 8"
(203mm x 203mm) wall opening.
NOTE: position with flanges on the left and
right sides of the opening. Face of frame
should be flush with or maximum 7/8" (22mm)
behind finished wall.

3. Secure frame in place through mounting holes.
(Fasteners provided by others.)

4. Place access panel over frame and secure in
place using (4) HEX socket screws. NOTE:
Installation of these screws will require the use
of an allen wrench. (Wrench not furnished).

PARTS LIST

ITEM NO. PART NO. DESCRIPTION

1 55000966 PANEL
2 74080057 #8-32 x 1.50 HSBH ST STEEL

70424C #8-32 x 1.50 HSBH-BT

3 70055C NUT SPEED

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE: