
This fountain is certified to
NSF/ANSI 61.
GENERAL
Three-Station face-mounted fountain made of
White Granite Marblyte™solid-surface nonporous polymer. Contour-formed basin with
softly rounded corners and edges reduces
splatter, insures proper drainage and prevents
standing waste water. Designed to be easily
accessible on either side to both physically
challenged and able-bodied individuals. Ideally
suited for installation in public areas. Model
meets state and federal requirements as
defined by the Americans with Disabilities Act.
FREEZE-RESISTANT VALVE SYSTEM
Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.
BUBBLERS
Vandal-resistant bubblers are one-piece,
chrome plated, and are secured to fountain with
anti-rotation mounting system. Unit has integral
hood guard design to prevent contamination from
other users, airborne deposits and tampering.
PUSHBUTTON ACTUATION MECHANISM
Self-closing, vandal-resistant pushbuttons do
not require grasping or twisting.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
BOTTOM COVER
Fountain is equipped with a bottom cover.
Cover is secured to the fountain with
vandal-resistant fasteners.
INLET STRAINER
Two easily cleaned in-line strainers screen
traps particles of 140 microns or larger before
they enter the waterway.
WATER INLET
3/8" O.D. Tubing
DRAIN OUTLET
1-1/2" tube outlet for 1-1/2" slip joint connection.
SUGGESTED SPECIFICATIONS
Fountain shall include pushbuttons on the front,
contour-formed basins to eliminate splashing
and standing water, and shall have rounded
corners and edges. Projectors shall be chromeplated vandal-resistant type with integral hood
guard and anti-squirt feature. Fountain shall
comply with ANSI 117:1 and ADA for visual and
motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI 61,
and the Safe Drinking Water Act.
Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.
Standard Finish is White Granite Marblyte
™
Optional Accessories (extra cost)
■■
Standard Double Bubblers
™
Each 7130 FR consists of 2 carton
of the following:
Fountain and Misc. Parts
Freeze-Resistant Valve System
Service stop not included.
Shipping weight: 152 lbs.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
B49 / 3-2009
MODEL 7130 FR
Barrier-Free Fountain
Freeze-Resistant
Three-Station Marblyte
™
halseytaylor.com
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:

Printed in the U.S.A.
7130 FR
Freeze-Resistant
Three Station Marblyte
™
Barrier-Free Drinking
Fountain
(CONTINUED)
MOUNTING INSTRUCTIONS
Refer to diagrams for rough-in of plumbing.
Bolt fountain securely to wall per installation
instructions. Water supply and waste line are
to be assembled as required. The final check
for leaks and correct functions of fountain
should be made. (For details see the
installation instructions.)
OPERATING PRESSURES:
Supply water - 105 psi maximum
Important:
For required wall support locations
see installation instructions provided with fountain.
NOTE: A service supply stop (not included)
must be installed at the fountain inlet line.
22"
559mm
8 3/4"
222mm
12"
305mm
MAX. WALL
THICKNESS
TOP VIEW
SIDE VIEWWALL LAYOUT
LEGEND
A = HOLE LOCATIONS FOR SECURING FOUNTAIN TO WALL
B = 7/8" DIA. (22mm) HOLE FOR OPERATING CABLE
C = 1-3/4" (44mm) HOLE FOR WASTE LINE
D = 7/8" DIA. (22mm) HOLE FOR WATER SUPPLY TUBE
31 5/8"
803mm
A A
28 3/16"
716mm
4 1/2"
114mm
A
27 3/8"
695mm
8 15/16"
227mm
6 1/2"
166mm
D
4 7/16"
113mm
2"
51mm
14 1/8"
359mm
C
L
14 1/8"
359mm
C
4 7/16"
113mm
2 11/16"
69mm
BB
27 3/8"
695mm
4 1/2"
114mm
A
28"
711mm
AA
29 1/2"
749mm
32"
813mm
12"
305mm
MAX. WALL
THICKNESS
18 1/16"
459mm
4 5/8"
117mm
3 5/8"
91mm
WASHER REQUIRED TO
MINIMIZE BREAKAGE
OF FOUNTAIN (TYPICAL)
ALL MOUNTING BOLTS
WASHERS NOT INCLUDED
13 13/16"
350mm
DETAIL #1
17 5/16"
439mm
28 3/16"
716mm