Halsey Taylor 4880 FR (30"") User Manual

These fountains are certified to

NSF/ANSI 61.

GENERAL

Pedestal, cast iron closed base with forest
green enamel finish for year-round beauty with
minimum maintenance. Contour-formed basin
with rounded corners and edges reduces
splatter, insures proper drainage and prevents
standing waste water. Model 4880FR is 30"
high and Model 4881FR is 36" high

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant valve designed for ground
installation 18" below the frost line. 60" of
access tubing provided with the freeze-resistant
valve system. The length of the tubing can be
adjusted in the field for lesser frost depths.

BUBBLER

Exclusive one-piece, vandal-resistant, chrome­plated two-stream mound-building bubbler with
non-removable anti-squirt feature and integral
hood insures a satisfying drink of water.

PUSHBUTTON ACTUATION MECHANISM

Self closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

WATER INLET

3/8" NPT fitting

DRAIN OUTLET

Drain requirements are detailed in owner’s
manual.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front.
Shall include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
single-stream type with integral hood guard and
anti-squirt feature. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI
61, and the Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Forest Green enamel.

Each 4880 and 4881 consists of 2 cartons
as follows:

Fountain
Freeze-Resistant Kit

Service stop not included.

Shipping weight: 87 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D21 / 8-2007

MODEL: ■■ 4880 FR (30") ■■ 4881 FR (36")

Pedestal Fountain

Freeze-Resistant

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:



Printed in the U.S.A.

4880 FR (30"), 4881 FR (36")

Freeze-Resistant
Pedestal Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS

Site and drainage excavation is required for
fountain installation. Refer to owner’s manual
for site preparation details. Provide solid,
well-drained surface to mount pedestal fountain
(concrete pad recommended). (3)

1

⁄2" anchor
bolts (not included) should be attached firmly to
mounting surface in order to secure fountain.
Refer to rough-in diagram and be sure to allow
an opening for the freeze-resistant valve in the
ground as shown in the installation instructions
that accompany the valve system. Refer to
local codes for any additional requirements.

NOTE: Fountain is not furnished with service
valve. Assemble fountain to prepared site and
mounting pad.

Position pedestal over plumbing and secure
base to anchor bolts. Remove access panels
and connect supply and water lines. Turn on
water supply and check for leaks. Refer to
owner’s manual for detailed instructions.

OPERATING PRESSURES:

Supply water- 20 psi minimum to
105 psi maximum.