Halsey Taylor 4715 FR User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Pedestal, Endura™steel fountain with textured
powder coat finish and E-Coat immersion for
year-round beauty with minimum maintenance.
The E-Coat immersion process coats the
outside and inside of the fountain for the
ultimate in corrosion protection. Contour­formed stainless steel basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant valve designed for ground
installation 18" below the frost line. 60" of
access tubing provided with the freeze-resistant
valve system. The length of the tubing can be
adjusted in the field for lesser frost depths.

BUBBLER

Exclusive one-piece, vandal-resistant, chrome­plated two-stream mound-building bubbler
with non-removable anti-squirt feature and
integral hood insures a satisfying drink of
water.

PUSHBUTTON ACTUATION MECHANISM

Self closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

WATER INLET

3/8" female NPT fitting

DRAIN OUTLET

1-1/4" tube outlet. Drain requirements are
detailed in owner’s manual.

ACCESS PANEL

Manufactured of heavy-gauge steel with
vandal-resistant screws. Provides access for
easy hook-up of all plumbing connections.

SUGGESTED SPECIFICATIONS

Fountain shall be upright pedestal, Endura

™

Steel with powder coat epoxy finish. Shall
include pushbutton on the front. Shall include
stainless steel contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
two-stream, mound-building type with integral
hood guard and anti-squirt feature. The
manufacturer shall certify the unit to meet the
requirements of NSF/ANSI 61, and the Safe
Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard finish is Evergreen textured
powder-coat Endura II

™

Each 4715 FR consists of 2 cartons of the
following:

Fountain

Freeze-Resistant Valve System

Service stop not included.

Shipping weight: 71 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

D18 / 8-2007

MODEL 4715 FR

Pedestal Fountain

Endura™ Steel

Freeze-Resistant

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

4715 FR

Freeze-Resistant Endura

™

Steel Pedestal Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS

Site and drainage excavation is required for
fountain installation. Refer to owner’s manual
for site preparation details. Provide solid,
well-drained surface to mount pedestal fountain
(concrete pad recommended). (4) 1⁄2" anchor
bolts (not included) should be attached firmly to
mounting surface in order to secure fountain.
Refer to rough-in diagram and be sure to allow
an opening for the freeze-resistant valve in the
ground as shown in the installation instructions
that accompany the fountain. Refer to local
codes for any additional requirements.

NOTE: Fountain is not furnished with service
valve. Assemble fountain to prepared site and
mounting pad.

Position pedestal over plumbing and secure
base to anchor bolts. Remove access panels
and connect supply and water lines. Turn on
water supply and check for leaks. Refer to
owner’s manual for detailed instructions.

OPERATING PRESSURES

Supply water - 20 psi minimum to
105 psi maximum.

TOP VIEW

FRONT VIEW

SIDE VIEW

LEGEND:

A = 3/8" O.D. UNPLATED COPPER TUBE CONNECT - SHUT OFF VALVE BY OTHERS
B = ACCESS PANEL