Halsey Taylor 4410 Sanitary FR User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Pedestal, Endura II™Steel fountain with
textured powder coat finish and E-Coat
immersion for year-round beauty with minimum
maintenance. The E-Coat immersion process
coats the outside and inside of the fountain for
the ultimate in corrosion protection. Contour­formed stainless steel basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.

SANITARY FREEZE-RESISTANT
VALVE SYSTEM

Fully sealed assembly minimizes chance of
ground water contamination, and prevents
drain water from mixing with fresh water.
Freeze-resistant valve designed for ground
installation 18" below the frost line.

BUBBLER

Vandal-resistant bubbler is one-piece,
chrome-plated, with integral hood guard
design to prevent contamination from other
users, airborne deposits and tampering.

PUSHBUTTON ACTUATION MECHANISM

Self closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Stream height regulator is located inside sanitary
freeze-resistant valve system to prevent tampering.
Unit resists corrosion and liming. A constant
stream height is automatically maintained
under line pressures that vary from 20 to 105 psi.

WATER INLET

1/2" male NPT fitting.

DRAIN OUTLET

Drain requirements are detailed in the owner’s
manual.

ACCESS PANEL

Manufactured of heavy-gauge steel with vandal­resistant screws. Provides access for easy
hook-up of all plumbing connections.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front.
Shall include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
chrome-plated vandal-resistant type with integral
hood guard and anti-squirt feature. Fountain shall
comply with ANSI 117:1 and ADA for visual and
motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI
61, and the Safe Drinking Water Act.

NOTE: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Evergreen textured
powder-coat Endura II

™

Each 4410 Sanitary FR consists of 2 cartons
of the following:

Fountain

Sanitary Freeze-Resistant Valve System

Service stop not included.

Shipping weight: 181 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B24 / 6-2008

MODEL 4410 Sanitary FR

Barrier-Free Fountain

Endura II™Tubular Pedestal

Sanitary Freeze-Resistant

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

4410 Sanitary FR

Sanitary Freeze-Resistant
Barrier-Free
Endura

II

™

Tubular

Pedestal Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS

Site and drainage excavation is required for
fountain installation. Refer to owner’s manual
for site preparation details. Provide solid,
well-drained surface to mount pedestal fountain
(concrete pad recommended). (6)

1

⁄2" anchor
bolts (not furnished) should be attached firmly
to mounting surface in order to secure fountain.
Refer to rough-in diagram and be sure to allow
an opening for the freeze-resistant valve in the
ground as shown in the installation instructions
that accompany the fountain. Refer to local
codes for any additional requirements.

NOTE: Fountain is not furnished with service
valve. Assemble fountain to prepared site and
mounting pad.

Position pedestal over plumbing and secure
base to anchor bolts. Remove access panels
and connect supply and water lines. Turn on
water supply and check for leaks. Refer to
owner’s manual for detailed instructions.

OPERATING PRESSURES:

Supply water - 105 psi maximum

SIDE VIEW

TOP VIEW

DETAIL A:

AIR GAP / VACUUM BREAKER

LEGEND
A = ACCESS PANEL
B = REMOVABLE BOTTOM COVER

ALL PVC PIPE CASINGS SUPPLIED BY INSTALLERS.

SEE OWNERS MANUAL FOR COMPLETE DETAILS.