Halsey Taylor 4410 FR User Manual

This fountain is certified to

NSF/ANSI 61.

GENERAL

Pedestal, Endura II™Steel fountain with
textured powder coat finish and E-Coat
immersion for year-round beauty with minimum
maintenance. The E-Coat immersion process
coats the outside and inside of the fountain for
the ultimate in corrosion protection. Contour­formed stainless steel basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.

FREEZE-RESISTANT VALVE SYSTEM

Freeze-resistant valve designed for ground
installation 18" below the frost line. 60" of
access tubing provided with the freeze-resistant
valve system. The length of the tubing can be
reduced in the field for lesser frost depths.

BUBBLER

Vandal-resistant bubbler is one-piece,
chrome-plated, with integral hood guard
design to prevent contamination from other
users, airborne deposits and tampering.

PUSHBUTTON ACTUATION MECHANISM

Self closing, vandal-resistant pushbutton does
not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.

WATER INLET

3/8" female NPT fitting

DRAIN OUTLET

Drain requirements are detailed in the owner’s
manual.

ACCESS PANEL

Manufactured of heavy-gauge steel with vandal­resistant screws. Provides access for easy
hook-up of all plumbing connections.

SUGGESTED SPECIFICATIONS

Fountain shall include pushbutton on the front.
Shall include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
chrome-plated vandal-resistant type with integral
hood guard and anti-squirt feature. Fountain
shall comply with ANSI 117:1 and ADA for visual
and motion disabilities. The manufacturer shall
certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act.

Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.

Standard Finish is Evergreen textured
powder-coat Endura II

™

Each 4410 FR consists of 2 cartons of the
following:

Fountain

Freeze-Resistant Valve System

Service stop not included.

Shipping weight: 162 lbs.

HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B25 / 6-2008

MODEL 4410 FR

Barrier-Free Fountain

Endura II™Tubular Pedestal

Freeze-Resistant

halseytaylor.com

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL:

DATE:

Printed in the U.S.A.

4410 FR

Freeze-Resistant
Barrier-Free
Endura

II

™

Tubular

Pedestal Fountain

(CONTINUED)

MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS

Site and drainage excavation is required for
fountain installation. Refer to owner’s manual
for site preparation details. Provide solid,
well-drained surface to mount pedestal fountain
(concrete pad recommended). (6)

1

⁄2" anchor
bolts (not included) should be attached firmly to
mounting surface in order to secure fountain.
Refer to rough-in diagram and be sure to allow
an opening for the freeze-resistant valve in the
ground as shown in the installation instructions
that accompany the fountain. Refer to local
codes for any additional requirements.

NOTE: Fountain is not furnished with service
valve. Assemble fountain to prepared site and
mounting pad.

Position pedestal over plumbing and secure
base to anchor bolts. Remove access panels
and connect supply and water lines. Turn on
water supply and check for leaks. Refer to
owner’s manual for detailed instructions.

OPERATING PRESSURES:

Supply water - 105 psi maximum

BACK VIEW

SIDE VIEW

TOP VIEW

LEGEND
A = ACCESS PANEL (8" x 10")
B = REMOVABLE BOTTOM COVER
C = 1" PVC DRAIN
D = PRESSURE FITTING

1-1/4" x 3/4"

E = CONNECTOR

1-1/4" TO 1-1/4"
F = 1-1/4" DRAIN TUBE
G = AIR CONTROL LINE
H = 1/4" WATER LINE
J = CONNECTOR FOR AIR

CONTROL LINE

*ADA Requirement