Halsey Taylor 4405 FR User Manual
This fountain is certified to
NSF/ANSI 61.
GENERAL
Wall-mounted, Endura II™Steel fountain with
textured powder-coat finish and E-coat
immersion for year-round beauty with minimum
maintenance. The E-coat immersion process
coats the outside and inside of the fountain for
the ultimate in corrosion protection. Contourformed stainless steel basin with rounded
corners and edges reduces splatter, insures
proper drainage and prevents standing waste
water. Designed to be easily accessible to both
physically challenged and able-bodied
individuals. Ideally suited for installation in
public areas. Model meets state and federal
requirements as defined by the Americans with
Disabilities Act.
FREEZE-RESISTANT VALVE SYSTEM
Freeze-resistant system features box that
installs behind non-freezing wall for housing
water connection from the stop to the strainer.
BUBBLER
Vandal-resistant bubbler is one-piece,
chrome-plated. Unit has integral hood guard
designed to prevent contamination from other
users, airborne deposits and tampering.
PUSHBUTTON ACTUATION MECHANISM
Self closing, vandal-resistant pushbutton does
not require grasping or twisting.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
WATER INLET
3/8" O.D. Tubing into freeze-resistant box.
DRAIN OUTLET
1-1/4" waste outlet located in freeze-resistant
valve system.
SUGGESTED SPECIFICATIONS
Fountain shall include pushbutton on the front.
Shall include contour-formed basin to eliminate
splashing and standing water, and shall have
rounded corners and edges. Projector shall be
chrome-plated vandal-resistant type with integral
hood guard and anti-squirt feature. Fountain
shall comply with ANSI 117:1 and ADA for visual
and motion disabilities. The manufacturer shall
certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act.
Note: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.
Standard Finish is Evergreen Textured
powder-coat Endura II™.
Each 4405 FR consists of 2 cartons of the
following:
Fountain
Freeze-Resistant Valve System
Service stop not included.
Shipping weight: 62 lbs.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
B22 / 6-2008
MODEL 4405 FR
Barrier-Free Fountain
Freeze-Resistant Wall-Mount
Endura II
™
Tubular
halseytaylor.com
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
4405 FR
Freeze-Resistant
Barrier-Free Endura
II
™
Tubular Wall-Mount Fountain
(CONTINUED)
MOUNTING INSTRUCTIONS
Refer to diagrams for rough-in of freeze-resistant system and plumbing. This fountain is to
be mounted on a smooth, flat finished wall surface with adequate support structure. See
installation instructions provided with fountain
for required wall support locations. NOTE: Wall
mounting structure must be capable of support
300 lb. load on fountain. Water service line and
waste line are to be assembled as required.
Final check for leaks and correct functions
of fountain should be made. (For details
see the installation instructions.)
Freeze resistant box must be installed
on interior non-freezing wall.
CAUTION — Fountain must be
securely bolted to wall.
OPERATING PRESSURES:
Supply water - 105 psi maximum
TOP VIEW
BACK VIEW
FRONT VIEW
SIDE VIEW
LEGEND:
A = MOUNTING BOLT LOCATIONS (4) (1/2” DIA. NOT PROVIDED)
B = 7/8" DIA. (22mm) HOLE FOR WATER SUPPLY TUBE.
C = 7/8" DIA. (22mm) HOLE FOR OPERATING CABLE.
D = 1-3/4" DIA. (44mm) HOLE FOR WASTE LINE.
NOTE: A service supply stop (not included)
must be installed at the fountain inlet line.
1-1/4" Trap provided.
Loading...