Halsey Taylor 42572 User Manual
GENERAL
The cane touch apron is an optional accessory
designed to bring the bottom of bi-level units
into line with each other to give a sense of
symmetry and to satisfy customer preference.
For use on Halsey Taylor HT Series units.
When installed properly HT units meet ADA
requirements without the cane apron. Finish is
stainless steel. Overall dimension: 12" W x 6" H
x 9
3
/4"D.
Note: Floor to underside measurements of
cane apron equals 27" when mounted correctly.
KIT CONSISTS OF:
■ Stainless Steel Cane Apron
■ Installation instructions
Use part #73-42572-42-830 when ordering.
NOTE: Continued product improvement makes
specifications subject to change without notice.
See Halsey Taylor website for most current
spec sheet.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
E21 / 1-2005
42572 Cane Touch Apron
for HT Series
Cane Touch Apron
www.halseytaylor.com
42572 Cane Apron shown installed on
Halsey Taylor Model HTSEBP
Printed in the U.S.A.
42572 Cane Touch Apron
for HT Series
(CONTINUED)
INSTALLATION INSTRUCTIONS FOR
42572 CANE APRON
TOOLS REQUIRED
• Phillips Head Screwdriver
Following example is for HTS Fountain.
INSTALLATION PROCEDURE:
1) Loosen and remove (4) screws (Item A)
from the underside of HTS fountain.
2) Install cane apron to the underside of
HTS fountain.
3) Reuse (4) screws from step 1 to secure
cane apron to your HTS fountain.
Loading...