In-Wall Mounting Systems
Universal Vandal-Resistant Kit 98030C
■
For use on most Halsey Taylor units to make
them more tamper-resistant
■
Vandal-resistant bubbler (replaces standard bubbler)
■
Assorted tamper-resistant screws, washers
and miscellaneous pieces
98032C Vandal-Resistant Small Drain Kit
(Not Pictured)
■
Modifies HRF series units with 11/4˝ drain
opening to make them more vandal-resistant
Vandal-Resistant Pinned Torx Bits
■
75520C T-25
■
75523C T-20
09855 Vandal-Resistant Drain Kit (Not Pictured)
■
Modifies units with 27/8˝ drain opening to
make them more vandal-resistant
1
5213 Sump Pump Kit (Not Pictured)
■
Pumps waste water from cooler to drain
■
Quiet 1⁄6 HP, 115V, 60 cycle motor
■
Pumps maximum 28 GPH at 40-foot height
■
Available for SCWT and S Series coolers only
Foot Pedal Kit 14703
(Not Pictured)
■
Allows on site installation of foot pedal in
minutes on most SCWT series floor-standing
Halsey Taylor water coolers
Kits And Accessories
Universal Glass Filler
Assembly Kit 96852CA
■
Includes all necessary pieces for field
installed replacement
■
Factory preparation recommended
■
81/8˝ high, bright polished
stainless steel gooseneck spout
■
Push-down lever handle
■
3/8˝ IPS supply
MLP100
■
Single in-wall mounting frame
■
For HTV, HAC & HVR series
MLP200
■
Bi-level in-wall mounting frame
■
For HTV, HAC & HVR series
MPW100
■
Single in-wall mounting plate
■
For OVL series
MPW101
■
In-wall mounting plate
■
For HDFF & HRF series single models
MPW200
■
In-wall mounting plate
■
For OVL, HDFF & HRF series bi-level models
MPW201
■
In-wall multi-station mounting plate
■
For 7120 Fountain
ML100
■
In-wall support legs (used with MPW series wall plates)
Glass Fillers
Additional Glass Fillers
only include:
■
2408 Chrome-plated factory installed
pushbutton glass filler (for 8880 and RC8)
Aqua Sentry
Model HWF142
Water Sentry VII
Model HWF172
96852CA
Universal Glass
Filler Kit
MLP100
MPW100
MLP200
Remodeling
Panel
Aqua Sentry Cyst and Lead
Reduction Filter HWF142
■
Removes lead, cyst, chlorine class I
and particulate class I
■
Size: 10.13˝ H x 2.10˝ D
■
Designed for use in Voyager™units, but fits most
Halsey Taylor models where space is a concern
56191C Replacement Filter for Aqua Sentry
Water Filtration Kits
Water Sentry VII Lead
Reduction Filter HWF172
■
Removes lead, cyst, chlorine class I
and particulate class I
■
Size: 121⁄2˝ H x 31⁄4˝D
■
Fits most Halsey Taylor units
55897C Replacement Filter for
Water Sentry VII
HTRP2130 Remodeling Panel
■
Trim piece for HTV8, HAC CHILD, and HVR
Series models
■
Attractive gray color blends with any decor
■
Constructed of durable, rust and corrosion
resistant ABS
■
Allows for increased retrofit applications
■
Size: 30˝ H x 21˝ W
APHT Access Panel Kit
(Not Pictured)
■
For units with traps behind wall
Cane Touch Apron Kits
(Not Pictured)
■
Available for HAC, HRF, HTV, HDF, HVR
and OVL-II Models
97887C Hose Bib Kit (Not Pictured)
■
Accessory with hose connection for
supplying non-potable water. For use on
Endura II™4400 Series fountains with floor
mounted base
■
Not for use on freeze-resistant fountains
97889C Locking Hose Bib Kit
(Not Pictured)
■
Same as above but with lockable protective
shroud to minimize vandalism
97890C Direct Bury Adaptor
(Not Pictured)
■
For use with Tubular Outdoor Fountains
For complete information, consult product specification sheets.
98030C
Universal
Vandal-Resistant Kit