Halo Lighting System LZR213R, LZR214, LZR201, LZR204, DE112 User Manual

CONNECTORS (For use with Lazer Track Only)

LZR200 Live End Feed with Junction

Box Cover

For starting a track run at beginning of
track and when connector is mounted to
a junction box.

Finishes: White (P), Black (MB)

LAZER™BY HALO

LZR201 Live End Feed

For starting a track run at beginning of track.

Finishes: White (P), Black (MB)

TRACK LIGHTING System

®

LZR202 Floating Canopy and

Connector Feed

Track can be connected to existing outlet
box located anywhere along the track.
Comes with canopy cover, connector,
dead end and mounting hardware.

Finishes: White (P), Black (MB)

LZR204 Conduit Adapter Feed

Designed to accept 1/2” trade size conduit
fitting (not supplied). Use when feeding
to track through surface conduit system.

Finishes: White (P), Black (MB)

LZR206 T-Bar Canopy

For installing track on T-Bar ceilings.
LZR201 or LZR203 also required.

Finish: White (P)

LZR211 Flexible Connector Feed

To connect two track sections at any angle
up to 90° or for connecting wall and ceiling
mounted track. Can be used as electrical
feed point.

Finishes: White (P), Black (MB)

LZR203 Adjustable “L” and Straight

Connector Feed

To connect two track sections at right angles
or straight end-to-end. Includes straight and
right angle covers.

Finishes: White (P), Black (MB)

LZR205 Conduit Continuation Feed

Includes one left feed and one right feed
to continue a run around obstructions.
Requires 1/2” trade size fitting (not included).

Finishes: White (P), Black (MB)

LZR208 Cord and Plug Feed

10’ three-wire cord with grounded plug.
Maximum capacity 5 AMPS.

Finishes: White (P), Black (MB)

LZR212 Mini Connector

For joining two track sections end-to-end.
LZR212 is not an electrical feed.

Finishes: White (P), Black (MB)

LZR213R Right Handed T Connector
LZR213L Left Handed T Connector

To connect three track sections. Can be used as
electrical feed point.

Finishes: White (P), Black (MB)

NOTE: Unless otherwise stated, Lazer
connectors are not compatible with Halo
Miniature Power-Trac.

LZR214 X Connector

For joining four track sections in an X pattern.
Can be used as electrical feed point.

Finishes: White (P), Black (MB)

DE112 Dead End

Replacement Dead end for Lazer Track ( 6
included).

Finishes: White (P), Black (MB)

COOPER LIGHTING

335