Halo Lighting System LV108, LV104, LV106, LV102 User Manual

LV501

Power Supply

60W max

10'

Cord

2', 4', 6', 8' Surface Channel

2', 4', 6', 8' Surface Channel

LV502
Power Supply
150W max

NOTE: LV502 Canopy can be
placed anywhere along channel
to utilize existing power sources.

120V
Supply

2', 4', 6', 8'
Surface Channel

LV503
150W max

Low Voltage
Feed

LV204

LINEA™by HALO

®

Channels

®

by HALO

™

LINEA

LV102, LV104, LV106, LV108

• LV102–2' Channel.
Actual length 20 3/16" (513mm)
Color Codes: P, MB

• LV104–4' Channel.
Actual length 44 3/16" (1122mm)
Color Codes: P, MB

• LV106–6' Channel.
Actual length 68 3/16"(1731mm)
Color Codes: P, MB

• LV108–8' Channel.
Actual length 92 3/16" (2341mm)
Color Codes: P, MB

SURFACE CHANNEL

Surface Channel

Surface-mount channel is used when
minimal size and weight are desirable.
Typical applications for surface-mount
are under-cabinet, in-cabinet, cove and
strip lighting. Surface-mount consists
of a housing with two square copper
conductors.

Size

Linea surface channel is 3/8" (9.5mm)
high and 3/4" (19mm) wide.

Finishes

White (P), Black (MB)

Connectors

Surface channel connectors and
feed points allow almost unlimited
configurations. Channels may be field
cut to any length. Channels can be
mechanically and electrically connected
by straight, right-angle and flexible
joiners. Electrical feeds to surface
channel are made using the end feed,
conduit feed, J-box feed or T-bar feed.
Feeds and joiners push into the end of
the channel and are secured with a
single screw. Electrical connections are
assured by compression-type, nickel­plated brass terminal blocks.

Grounding

Low-voltage lighting systems do not
require grounding when used with
LV500 series isolated power supplies.

Polarity

The lampholder adapter may be inserted
in either orientation, simplifying
installation and allowing greater than
360º rotation for maximum fixture
adjustment.

Specifications

Surface-mount channel consists of a
thermal plastic housing with two 10AWG
nickel-plated copper conductors.
Electrical capacity is:
12V, 25amp, 300 Watt maximum
24V, 25amp, 600 Watt maximum

PLANNING A LINEA LAYOUT

Surface Channels

Starting Surface Channel Runs with Electronic Power Supplies (choose one)

NOTE: Surface Channel may be up to 20’ with electronic power supplies and 40’ with magnetic power supplies.

LV501

LV502

Starting and Adding to Surface Channel Runs with Magnetic Power Supplies

Magnetic

Power Supply

120V or 277V Supply 12V or 24V Feed

Power Supplies Feed Points Channels Joiners Additional Channels

LV503
LV506
LV507
LV508
LV509

Feed Point

LV200 J-Box Feed
LV201 End Feed
LV204 Conduit Feed
LV206 T-Bar Feed

LV206 T-Bar Feed with
up to three additional
TB206 Terminal Blocks

CHANNEL

2’ Surface Channel
4’ Surface Channel
6’ Surface Channel
8’ Surface Channel

Joiner

LV202 Straight Joiner

LV203 Right-Angle Joiner

LV205 Flexible Joiner

LV503

ADDITIONAL CHANNEL

2’ Surface Channel
4’ Surface Channel
6’ Surface Channel
8’ Surface Channel

278

COOPER LIGHTING