Halo Lighting System L650, L653, L651, L652 User Manual
HALO
Feed Point A Feed Point B Feed Point C
®
TRACK LIGHTING Single Circuit
L650, L651, L652, L653
• L650–2’ Track. Actual length 20 1/8”(511mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)
• L651–4’ Track. Actual length 44 1/8”(1121mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)
• L652–8’ Track. Actual length 92 1/8”(2340mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)
• L653–12’ Track. Actual length 140 1/8”(3559mm).
Finishes: White (P), Black (MB), Silver (SL)
MINIATURE
Miniature Trac Provides Versatility
for Every Lighting Need
Miniature size, decorator finishes, pushin connectors, economy, all combine to
make single-circuit Miniature Trac perfect
for residential or commercial use.
Size
Miniature Trac is only 11/16” (17.5mm)
deep by 1 3/8” (35mm) wide.
Finishes
Miniature Trac is available in six finishes
to meet any decorating need: White,
Matte Black, Antique Brass, Polished
Brass, Bronze and Silver.
Connectors
Connectors simply push into the ends of
the Trac, eliminating splicing. L’s, T’s, X’s
and the Flexible Connector allow track to
be assembled in almost any pattern.
Grounding
To ensure safe operation the entire track
system is fully polarized and grounded.
Grounding is accomplished
automatically by a separate solid copper
ground conductor in the track. The
ground conductor maintains continuity
to the building’s grounding system
through the ground contact fingers in
each of the connectors.
Specifications
The structural channel is extruded
aluminum with .060” nominal wall
thickness. Conductors are solid copper
buss bars encased in rigid extruded PVC
insulators. Polarized connectors and end
caps are molded polycarbonate.
Electrical capacity is 20 AMPS. Halo
Miniature Trac is UL listed, CSA certified.
Polarity
A visual polarity line on Power-Trac units
indicates proper electrical installation.
Simply line up polarity on Power-Trac
and lampholder adapter.
WIRING DETAILS
This single circuit, low-profile Trac is ideal for applications
where there is need for one lighting circuit.
ACCESSORIES
L900 Outlet Box Cover
Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.
Finish: White (P), Black (MB)
L902 Flexible Connector
To connect two track sections at any angle up to
90° in either plane or wall to ceiling or pitched
ceiling applications.
Finish: White (P), Black (MB)
Should more circuit control be required, switched feed
points can be made at additional connectors.
L901 Live End Connector
To start a run.
Finish: White (P), Black (MB)
L903 Straight Connector
To connect two track sections end-to-end.
L903 differs from mini connector L908 in
that it provides a center feed option and is
longer. May be used as feed point.
Finish: White (P), Black (MB)
COOPER LIGHTING
310
HALO
TRACK LIGHTING Single Circuit
®
L904 L Connector
To connect two track sections at a right angle.
Field adjustable for either right hand or left hand
application. May be used as feed point.
Finish: White (P), Black (MB)
L906 X Connector
To connect four track sections into a cross
configuration. May be used as feed point.
Finish: White (P), Black (MB)
L908 Mini Joiner
A low profile connector to cleanly and crisply
join two straight track sections end-to-end.
(Note: The L908 is not a feed point).
Finish: White (P), Black (MB)
L950 Cord and Plug Connector
12’ three-wire cord with grounded plug.
Maximum capacity 10 AMP
Finish: White (P), Black (MB)
L905 T Connector
To connect three track sections into a T
configuration. Field adjustable for either right
hand or left hand application. May be used as
feed point.
Finish: White (P), Black (MB)
L907 Outlet Box for use with
L901, L903, L904, L905 or L906 connector also
required. 4”x 4” x 1 1/8”.
Finish: White (P), Black (MB)
L909 Floating Canopy and
Track can be connected to existing outlet
box located anywhere along the track. Comes
with canopy cover, connector, dead-end and
mounting hardware. 4 1/8” x 4 1/4” x 1 3/8”.
Finish: White (P), Black (MB)
L951 Wire Way Cover for Pendant
For track to be wired through stem (order one
for each feed point used). Shown with end
feed and pendant stem kit–order separately
Finish: White (P), Black (MB)
T-Bar ceiling
Connector
Assembly Kit
L979 Conduit Continuation Kit
Consisting of one left feed and one right feed.
To continue a run around obstructions. Designed
to accept 1/2” trade size conduit fitting (not
included).
Finish: White (P), Black (MB)
L983 T-Bar Attachment Clip
Allows track to be attached to inverted tee ceiling.
Order as follows: 2 kits for 2’ Trac; 2 kits for 4’
Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac.
L986 Mini-T Bar Clip
For mounting Trac on suspended ceilings with
mini-grid (9/16” wide) system.
L994 45° Pendant Adapter
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.
Finish: White (P), Black (MB)
L980 Live End Conduit Adapter
Designed to accept standard 1/2” trade size
conduit fitting (not supplied). Use when
feeding to track through surface conduit
system.
Finish: White (P), Black (MB)
L992 Pendant Kit Assembly
Order 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits
for 8’ Trac; and 4 kits for 12’ Trac. Includes one
18” threaded steel stem, canopy and mounting
hardware.
L48 48” Steel Stem
For additional length with L992. Can be field cut.
Finish: White (P), Black (MB)
DE600 Dead End
Replacement Dead Ends for Single Circuit Track
(6 included)
Finish: White (P), Black (MB)
COOPER LIGHTING
311
Loading...