HALO Innovations GPS-200IT User Manual

HALO

TRACK LIGHTING Recessed

®

L1901 Live End Connector

Housing

To start a run. L901 or L941 required to
complete installation.

Finish: White (P)

L1904 L Connector Housing

To connect two track sections at 90° angle.
L904 or L943 required to complete
installation.

Finish: White (P)

L1906 X Connector Housing

To connect four track sections into a cross
configuration. L906 or L946 required to
complete installation.

Finish: White (P)

L932 Cross Tee Adapter Clip

Use in track housing groove to assemble
15/16” cross tee. For use with Chicago
Metallic 200 System, National Rolling Mills
ML System, Donn Corporation DX
System.

L1903 Straight Connector and

Housing

Connect two Miniature Power-Trac sections end
to-end.

Finish: White (P)

L1943 To connect two Halo-2 Power-Trac

sections end-to-end.

Finish: White (P)

L1905 T Connector Housing

To connect three track sections into a T
configuration. L905, L945R or L945L required to
complete installation.

Finish: White (P)

L930 Housing End Cap

For symmetry of installation at end of run.

Finish: White (P)

L934 Cross Tee Adapter Clip

Use in track housing groove to assemble 9/16”
cross tee. For use with Chicago Metallic Tempra
4000 System, National Rolling Mills SLK System,
Donn Corporation Centricitee System.

L935 Recessed Housing

Hanger

Use to suspend Recessed Power-Trac
Housing.

L938 Cross Tee End

For use when cross tee is cut. Pop rivet to
cross tee and insert into L932, L934 cross
tee adapter.

L940 Mini Connector Kit

Contains two joiner strips and hardware.
For recessed channel when using L908 or
L949.

L937 Raceway Cover

Cover allows Recessed Housing to be used as
Raceway to carry up to 6 #12 AWG wires. 4’
lengths. One cover is required for each raceway
channel.

L939 Lathing Tab

Use to suspend Recessed Power-Trac Housing to
carrying channel (10” long).

COOPER LIGHTING

321