3. Insert the plastic sleeve holding the batteries into the
battery chamber negative end down.
4. Screw on ashlight end of the HALO ashlight.
Limited Warranty
HALO2CLOUD, LLC warrants its products to be free from defects in
material and workmanship under normal use. Conditions are as
follows:
- During the rst 1 year from date of purchase, HALO2CLOUD, LLC
will repair or replace the defective product.
- HALO2CLOUD, LLC will, subject to inspection, repair the defective
product or replace it with a new or reconditioned unit. The return
must be accompanied by a Return Materials Authorization (RMA)
number to be issued upon request, and must be shipped prepaid. A
shipping rebate will only be extended to the customer in the event
that a defect in material or workmanship is conrmed.
- Warranty is void if the product has been improperly handled or
misused in any way, or if the label and/or bar-coded warranty label
has been removed or tampered with.
- Warranty returns require a check for $14.95 for processing and
handling made payable to HALO2CLOUD, LLC.
- Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase and be sent to HALO2CLOUD,
LLC (www.halo2cloud.com).
- The warranty does not extend to the electronic equipment that is
used or which incorporates with any of our products and
accessories. HALO2CLOUD, LLC shall not be held responsible for the
improper use of its products.
To contact us, email us at
support@halo2cloud.com
or call 888-907-6274
Operating Instructions
HALO
Telescopic Flashlight
HALO2CLOUD, LLC
148 Eastern Boulevard, Suite 210
Glastonbury, CT 06033
www.halo2cloud.com
Included Items
- 1 HALO Telescoping Flashlight (4 Batteries included)
- Operating Instructions/Warranty
Getting Started
Unscrew the ashlight end of the HALO ashlight and
remove the plastic cover protecting the batteries (batteries
included).
To Turn On/O the HALO Telescoping Flashlight
Press the black power button found on the side of the
HALO ashlight to turn the device on. Pressing the black
power button again will turn the HALO ashlight o.
HALO Telescoping Flashlight Features
Extension Feature
To use the extension feature of the HALO ashlight simply
grab the body of the ashlight with one hand and the
ashlight tip with the other hand and pull the extension
out to the desired level. Once the HALO ashlight is at the
desired extension level, using the bendable portion of the
extension you can change the position of the ashlight tip.
Magnet Feature
Both ends of the HALO ashlight have a built in magnet. To
use this feature simply place either of the ashlights
magnetic ends against a metal object or surface. There are a
number of ways that this feature can be used to help solve
your everyday problems.
Storing/Handling/Cleaning the HALO Telescoping
Flashlight
- Do not get wet or store in extreme temperature conditions.
- Do not disassemble the HALO ashlight or attempt to
repair it.
- Use a soft cloth with soap to clean the exterior of your
HALO ashlight. Do not use liquid detergent or chemicals of
any kind.
Safety Precautions
- This HALO ashlight has been designed and manufactured
to ensure personal safety. Please read the following carefully
before using.
- Carefully read the operating instructions, and use the HALO
ashlight correctly and for appropriate uses.
- Batteries should be recycled or disposed of as per state and
local guidelines.
Replacing the Batteries
1. Unscrew the ashlight end of the HALO ashlight. Remove
plastic sleeve that holds the batteries and slide out batteries.
Old batteries should be recycled or disposed of as per state
and local guidelines.
2. Replace the four LR44 button cell batteries by following
the arrow guide on the sleeve and inserting the negative
end rst.
1. Power Button
2. Magnetic Ends
3. Extension Rod
4. Bendable Extension
1
2
3
4
+
-
Loading...